← Search

11.7 AMP PAGE

11. TRACK PARAMETERS > 11.7 AMP PAGE · PDF p. 56–57 · OS 1.15A

# 11.7 AMP PAGE

11. TRACK PARAMETERS
DEL
Envelope delay sets the time before the attack phase of the filter envelope starts. This parameter is part
of the filter envelope that controls the multimode filter. You can also press and hold [FUNC] and then
turn DATA ENTRY knob A to quickly access this parameter from FILTER page 1.
KEY.T
Keytrack sets how much the filter cutoff frequency is affected by what note is playing. The higher the
KEY.T setting, the more the filter opens up at higher notes.
BASE
Sets the base frequency of the filter.
WIDTH
Sets the frequency width above the base frequency.
BW.RT
BW Routing selects if the base-width filter should be routed before (Pre) or after (Post) the machine
selectable filter in the audio path.
RSET
Filter Envelope reset sets the filter envelope behavior:
ON resets the envelope for each consecutive trig (default).
OFF does not reset the envelopes for each consecutive trig.
11.7 AMP PAGE
The AMP page controls parameters for the amplitude envelope, panning, and volume.
Press [AMP] to access this parameter page.
ATK
Attack Time sets the length of the attack phase of the amp envelope.
HOLD
Hold Time sets the length of the hold phase of the amp envelope. Fixed Hold time values (0–126) specify
the length of the hold phase, and the envelope ignores Note Off events such as Trig Length, releasing a
[TRIG] key or a key on an external controller. Setting HOLD to NOTE means the hold phase will be deter­
mined by Note On and Note Off events. This parameter is only available if MODE on is set to AHD.
If you set HOLD to NOTE and use an external keyboard to trigger the envelope, then the
sound will be sustained (if DEC is set to less than 127) for as long as you press a key on the
keyboard.
DEC
Decay Time sets the length of the decay phase of the amp envelope.
SUS
Sustain Level sets the sustain level of the amp envelope. This parameter is only available if MODE on is
set to ADSR.
REL
Release Time sets the length of the release phase of the amp envelope. This parameter is only available
if MODE is set to ADSR.

11. TRACK PARAMETERS
RSET
Amp envelope reset sets the amp envelope behavior:
ON resets the envelope for each consecutive trig (default).
OFF does not reset the envelope for each consecutive trig.
MODE
Envelope mode sets the amplitude envelope to function an AHD or an ADSR envelope.
PAN
Pan positions the audio in the stereo field.
VOL
Volume sets the volume amount of the amplifier. Unlike the track LEVEL, this parameter can be parame­
ter locked.

Amplitude envelope with MODE set to AHD and a fixed HOLD time.
TIME
AMPLITUDE
Note On
Attack
Decay
Hold
Note Off
Attack
Decay
Hold
Note On
Note Off
Attack
Decay
Hold
Note On Note Off
Amplitude envelope with MODE set to AHD and HOLD set to NOTE.
TIME
AMPLITUDE
Note On
Attack
Decay
Hold
Note Off
Attack
Decay
Hold
Note
On
Note Off
Attack/
Hold
Decay
Note On
Note Off
11.8 FX PAGE
The FX parameter page contains a number of FX related parameters such as the Bit Reduction, Overdrive,
and Sample Rate Reduction. Here you also find the send levels for the Delay, Reverb, and Chorus effects.
Press [FX] to access this parameter page.

Chunks share pages with neighboring sections; text before/after the section heading belongs to the adjacent sections.