← Search

12.8 FX MIXER

12. FX AND MIXER PARAMETERS > 12.8 FX MIXER · PDF p. 66 · OS 1.15A

# 12.8 FX MIXER

12. FX AND MIXER PARAMETERS
12.8 FX MIXER
(MIXER PAGE 4)
On the FX MIXER page you can set the levels of the send effects and master overdrive.
Press [FUNC] + [MOD] four times to access this parameter page.
VOL
Pattern Volume sets the patterns overall audio level. This parameter can be used to balance the volume
between different patterns and is saved together with the kit. Use LEVEL/DATA to adjust the settings.
CHR
Chorus Mix Volume sets the master volume of the chorus.
DEL
Delay Mix Volume Sets the master volume of the delay.
REV
Reverb Mix Volume sets the master volume of the reverb.
MOVD
Master Overdrive sets overall amount of overdrive for the audio tracks in the kit. Use LEVEL/DATA to
adjust the settings.
12.9 EXTERNAL MIXER
(MIXER PAGE 5)
The EXTERNAL MIXER page contains a number of parameters related to when you use the IN L/R inputs
to process incoming audio.
IN LR
In Level sets the level of the audio from the IN L/R audio input.
DUAL
Dual Mono sets if the inputs are processed as a single stereo input or as two separate mono inputs. Set­
ting this parameter to ON changes the rest of the parameters from controlling both inputs to separate
controls for channel L and R split over two mixer pages The BAL parameters changes to a PAN parame­
ter. Use B to adjust this parameter.
BAL
Balance sets the balance of the audio from the INPUT L and INPUT R inputs in the stereo field.
VOL
Pattern Volume sets the patterns overall audio level. This parameter can be used to balance the volume
between different patterns and is saved together with the kit. Use LEVEL/DATA to adjust the settings.

Chunks share pages with neighboring sections; text before/after the section heading belongs to the adjacent sections.