14.8 SYSTEM
14. SETTINGS MENU > 14.8 SYSTEM · PDF p. 83–85 · OS 1.15A
# 14.8 SYSTEM 14. SETTINGS MENU 14.8 SYSTEM The System menu contains a number of system related settings for the Digitakt II. 14.8.1 USB CONFIG Here you find settings related to USB audio and MIDI. Selecting one mode disables the other two modes. OVERBRIDGE enables Overbridge functionality. For more information, please see “6.6 OVERBRIDGE” on page 20. USB MIDI select this option if you wish to send and receive MIDI over USB. USB AUDIO/MIDI sets the Digitakt II to send and receive audio and MIDI over USB. Select this option if you want to use the Digitakt II together with a class compliant USB audio host. 14.8.2 OS UPGRADE Use this menu option when you want to upgrade the Digitakt II OS. To send the OS file, use our free Elek tron Transfer software. Elektron Transfer can be downloaded from the Elektron website. The device sending the OS file must be connected to the USB port of Digitakt II. Please note that the Digitakt II will not appear as an icon on your computer desktop. 1. Download the Digitakt II OS file from the Elektron website. 2. Connect the Elektron device to the computer via USB. 3. Open the Transfer application on your computer. 4. On the Transfer CONNECTIONS page, set the MIDI IN and MIDI OUT ports to your Elektron device. 5. On the Transfer DROP page, drag and drop the OS file. The OS file is then automatically trans ferred to the Elektron device and the OS update initiates. A progress bar is visible on device screen when receiving the OS. 6. On your device. Press [YES] to confirm the OS update. When the update is done, the Digitakt II will reboot. 14.8.3 FORMAT +DRIVE You have the possibility to erase all content of the +Drive. Once you have made your choices using the [LEFT]/[RIGHT] keys and confirmed by pressing [YES], a prompt will appear asking if you want to exe cute the formatting procedure. Press [YES] to proceed with the formatting. 14. SETTINGS MENU PROJ+PST+KIT Erases all projects, presets, and kits. SAMPLES Erases all samples. The factory samples can not be erased and they do not take up any of the 20 GB user space on the +Drive. 14.8.4 STORAGE Here you get an overview of what is stored in the RAM and the +Drive and how much memory that is available. Other than the number of Projects, presets, kits, and samples, and you also see the amount of sample time used and remaining. On the right, you see the memory usage of the RAM and the +Drive. 15. STARTUP MENU 15. STARTUP MENU To access this menu, hold down the [FUNC] key while powering up the Digitakt II. From here you can per form a variety of tasks. To choose the different alternatives, press the corresponding [TRIG] key. 15.1 TEST MODE To enter this mode, press the [TRIG 1] key. For testing purposes, a short sound is heard through all outputs of the unit. If you have any trouble with your Digitakt II and suspect it may be due to a hardware problem, perform this self-test. The [UP] and [DOWN] keys can be used to scroll through the test log. A fully functional device should not report any errors. If it does report an error, please contact Elektron support or the retailer that you bought your Digitakt II from. 15.2 EMPTY RESET To perform this operation, press the [TRIG 2] key. All patterns and presets will be erased. The data on the +Drive remains intact. 15.3 FACTORY RESET When performing a factory reset on the Digitakt II, it will overwrite and re-initialize the active RAM project (including all pattern and global data). The +Drive project slot 1 will be overwritten and re-initialized with factory preset patterns, presets and settings. preset bank A will be overwritten with the factory presets. If you wish to keep the active project, remember to save it to a +Drive project slot higher than 1 before you perform a factory reset. To perform a factory reset, press the [TRIG 3] key. 15.4 OS UPGRADE Use this menu option if you for some reason cant upgrade the Digitakt II OS using the standard procedure in the SYSTEM menu. To send the OS file, use our free Elektron Transfer software. The Elektron Transfer can be downloaded from the Elektron website. 1. Download the Digitakt II OS file from the Elektron website. 2. Connect the Digitakt II’s MIDI IN port to the MIDI OUT port of the computer’s MIDI interface. 3. Hold down the [FUNC] key while powering on Digitakt II. This takes you to the STARTUP menu. 4. Press the [TRIG 4] key to enter OS UPGRADE mode. 5. Open the Transfer application on your computer. On the Transfer CONNECTION page, click “go to the SYSEX TRANSFER page”. 6. On the SYSEX TRANSFER page, click “OS Upgrade via device startup menu”, and then follow the on- screen instructions. When the update is done, the Digitakt II will reboot. USB MIDI transfer is not possible when upgrading the OS from the STARTUP menu. 15.5 EXIT Press the [TRIG 5] key to exit the STARTUP menu.
Chunks share pages with neighboring sections; text before/after the section heading belongs to the adjacent sections.