← Search

16. SETUP EXAMPLES

16. SETUP EXAMPLES · PDF p. 86 · OS 1.15A

# 16. SETUP EXAMPLES

16. SETUP EXAMPLES
16. SETUP EXAMPLES
The Digitakt II likes to play with other machines. Whether it uses its ability to sync and play with legacy ma­
chines, samples from your smart phone or controls other synthesizers: Digitakt II gets along with other gear.
16.1 DIGITAKT II WITH A MONOPHONIC BASS MACHINE
The DIN sync capabilities of the Digitakt II allows you to use gear from yesteryear.
In this example, a legacy monophonic bass machine is used alongside the Digitakt II. The Digitakt II can
stop, start and control the tempo of the bass machine.
1.	 Prepare a bassline pattern on the bass machine.
2.	 Connect the output of the bass machine to the mixer using a Mono jack 6.3 mm male cable.
3.	 Connect the Digitakt II audio outputs to the mixer using 2 x Mono or Stereo jack 6.3 mm male cables.
4.	 Use a DIN connector cable to connect the MIDI OUT of the Digitakt II to the SYNC IN of the bass
machine.
5.	 On the Digitakt II, press [SETTINGS], and then navigate to MIDI CONFIG > PORT CONFIG and set
OUT PORT CONFIG to DIN24.
6.	 Press [PLAY] on the Digitakt II.
16.2 DIGITAKT II WITH A SMART PHONE

Chunks share pages with neighboring sections; text before/after the section heading belongs to the adjacent sections.