← Search

APPENDIX A: MACHINES

APPENDIX A: MACHINES · PDF p. 93 · OS 1.15A

# APPENDIX A: MACHINES

APPENDIX A: MACHINES
APPENDIX A: MACHINES
A machine is a module within the Digitakt II with specific functionality. A machine can be switched out for
another machine in the same category. For example different sample playback engines or a selection of
filters. Every machine has a specific set of parameters tailored to give you the most relevant and useful
sound-shaping possibilities for that particular machine. For more information, please see “5.3.1 AUDIO
TRACKS AND MACHINES” on page 17.
Use the [UP]/[DOWN] keys to cycle through the parameter group’s pages. You can also press a [PARAM­
ETER] key repeatedly to cycle trough the parameter pages in that group. Press and hold a [PARAMETER]
key to see the values for all parameters on that page.
A.1 ASSIGNING MACHINES TO THE ACTIVE TRACK
1.	 Press [FUNC] + [SRC] to open the MACHINE menu.
2.	 Use the [LEFT]/[RIGHT] keys to navigate to the desired machine category.
3.	 Use the [UP]/[DOWN] keys to select machine, and then press [YES] to assign the selected machine
to the track.
The rest of this appendix lists the machine-specific parameters on the SRC and FLTR pages. The selected
machine determines the parameters available. SRC page 2 contains the same parameters as on page 1 but
with a view of the sample waveform. For more information, please see “11.4 SRC PAGE” on page 55.
A.2 SRC MACHINES
The SRC machines are sound engines that uses a particular subset of the functionality of the sample play­
back engine. In this section you also find the MIDI machine that lets you control external, MIDI equipped,
gear. For more information, please see “5.3.2 MIDI TRACKS” on page 17. You can assign any SRC ma­
chine to any track.
A.2.1 ONESHOT
The Oneshot machine is the default machine and plays the sample linearly (forward, reversed, or looped).
Press [SRC] to access this parameter page and to toggle between page 1 and page 2.
TUNE
Tune sets the pitch of the sample. The knob works in a bipolar fashion, and a value of 0 leaves the
pitch unchanged. The range is +/- 5 octaves. Press and hold [FUNC], and then turn the DATA ENTRY
knob to snap parameter values to full octaves. Press and turn the DATA ENTRY knob to snap parame­
ter values to semitones.
PLAY
Play Mode sets the play mode of the sample. It controls how the sample will be played back when it is
trigged.

Chunks share pages with neighboring sections; text before/after the section heading belongs to the adjacent sections.