A.1 ASSIGNING MACHINES TO THE ACTIVE TRACK

1. Press [FUNC] + [SRC] to open the MACHINE menu.
2. Use the [LEFT]/[RIGHT] keys to navigate to the desired machine category.
3. Use the [UP]/[DOWN] keys to select machine, and then press [YES] to assign the selected machine to the track.

The rest of this appendix lists the machine-specific parameters on the SRC and FLTR pages. The selected machine determines the parameters available. SRC page 2 contains the same parameters as on page 1 but with a view of the sample waveform. For more information, please see “11.4 SRC PAGE” on page 55.

A.2 SRC MACHINES

The SRC machines are sound engines that uses a particular subset of the functionality of the sample playback engine. In this section you also find the MIDI machine that lets you control external, MIDI equipped, gear. For more information, please see “5.3.2 MIDI TRACKS” on page 17. You can assign any SRC machine to any track.

A.2.1 ONESHOT

The Oneshot machine is the default machine and plays the sample linearly (forward, reversed, or looped). Press [SRC] to access this parameter page and to toggle between page 1 and page 2.

TUNE

Tune sets the pitch of the sample. The knob works in a bipolar fashion, and a value of 0 leaves the pitch unchanged. The range is +/- 5 octaves. Press and hold [FUNC], and then turn the DATA ENTRY knob to snap parameter values to full octaves. Press and turn the DATA ENTRY knob to snap parameter values to semitones.

PLAY

Play Mode sets the play mode of the sample. It controls how the sample will be played back when it is trigged.