Knobwerk
MAIN_VOLUMEMain VolumeLEVEL_DATA — Preset PoolLevel/DataSCREEN
T1 AUDIO · MULTI-MODE2/2
FLTR2
ADEL
B—
C—
DKEY.T
EBASE
FWIDTH
GBW.RT
HRSET
ENC_AAENC_BBENC_CCENC_DDENC_EEENC_FFENC_GGENC_HHTRIG_PARAMS — QuantizeTRIGQuantizeSRC — MachineSRCMachineFLTR — SetupFLTRSetupAMP — SequencerAMPSequencerFX — Send FXFXSend FXMOD — MixerMODMixerPRESET_KIT — Perform▤PerformSETTINGS — Save Proj⚙Save ProjSAMPLING — Samples≈SamplesTEMPO — Tap TempoTap TempoRECORD — Copy○CopyPLAY — Clear▷ClearSTOP — Paste□PasteFUNCFUNCKEYBOARD — KB SetupKB SetupTRK — Mute ModeTRKMute ModePTN — BankPTNBankSONG — Song EditSONGSong EditYES — SaveYESSaveNO — ReloadNOReloadUP — Trig Mode^Trig ModeLEFT — uTime-<uTime-DOWN — Trig ModevTrig ModeRIGHT — uTime+>uTime+PAGE — Fill/SetupPAGEFill/SetupTRIG_11TRIG_22TRIG_33TRIG_44TRIG_55TRIG_66TRIG_77TRIG_88TRIG_99TRIG_1010TRIG_1111TRIG_1212TRIG_1313TRIG_1414TRIG_1515TRIG_1616
T1 AUDIO · MULTI-MODE2/2
FLTR2
ADEL
B—
C—
DKEY.T
EBASE
FWIDTH
GBW.RT
HRSET

This panel is live — click keys to operate it. [FUNC] toggles the second layer, [TRK] then a trig key switches track, parameter-page keys cycle their pages, [UP]/[DOWN] browse, encoders inspect parameters.

BASEFLTR2 · knob E

Sets the base frequency of the base-width filter. With BASE set to 0, the filter functions as a low pass filter with WIDTH adjusting the frequency range. With BASE set to 0 and WIDTH set to 127 the filter does not affect the sound.

Base frequency§11.6
Getting StartedIntro, setup, and the quick start chapterProcedures82 step-by-step operations, played on the panelParameters260 parameters across all track types and machines
Digitakt II Interactive Manual · Knobwerk