Knobwerk
MAIN_VOLUMEMain VolumeLEVEL_DATA — Preset PoolLevel/DataSCREEN
T1 AUDIO1/2
TRIG1
ANOTE
BVEL
CLEN
DPROB
ELFO.T
FFLT.T
GFILL
HCOND
ENC_AAENC_BBENC_CCENC_DDENC_EEENC_FFENC_GGENC_HHTRIG_PARAMS — QuantizeTRIGQuantizeSRC — MachineSRCMachineFLTR — SetupFLTRSetupAMP — SequencerAMPSequencerFX — Send FXFXSend FXMOD — MixerMODMixerPRESET_KIT — Perform▤PerformSETTINGS — Save Proj⚙Save ProjSAMPLING — Samples≈SamplesTEMPO — Tap TempoTap TempoRECORD — Copy○CopyPLAY — Clear▷ClearSTOP — Paste□PasteFUNCFUNCKEYBOARD — KB SetupKB SetupTRK — Mute ModeTRKMute ModePTN — BankPTNBankSONG — Song EditSONGSong EditYES — SaveYESSaveNO — ReloadNOReloadUP — Trig Mode^Trig ModeLEFT — uTime-<uTime-DOWN — Trig ModevTrig ModeRIGHT — uTime+>uTime+PAGE — Fill/SetupPAGEFill/SetupTRIG_11TRIG_22TRIG_33TRIG_44TRIG_55TRIG_66TRIG_77TRIG_88TRIG_99TRIG_1010TRIG_1111TRIG_1212TRIG_1313TRIG_1414TRIG_1515TRIG_1616
T1 AUDIO1/2
TRIG1
ANOTE
BVEL
CLEN
DPROB
ELFO.T
FFLT.T
GFILL
HCOND

This panel is live — click keys to operate it. [FUNC] toggles the second layer, [TRK] then a trig key switches track, parameter-page keys cycle their pages, [UP]/[DOWN] browse, encoders inspect parameters.

FILLFillTRIG1 · knob G

A separate trig condition that determines if a trig plays depending on whether the device is in FILL mode. A trig with FILL set to ON plays when FILL mode is active; set to OFF it plays when FILL mode is not active. The sequencer must be in FILL mode to activate the FILL trig condition.

OFF / ON§11.2
Getting StartedIntro, setup, and the quick start chapterProcedures82 step-by-step operations, played on the panelParameters260 parameters across all track types and machines
Digitakt II Interactive Manual · Knobwerk