11.6 FLTR PAGE 2
11. TRACK PARAMETERS > 11.6 FLTR PAGE 2 · PDF p. 59–60 · OS 1.10D
# 11.6 FLTR PAGE 2 11. TRACK PARAMETERS PTIM Portamento Time sets the time for the portamento. PORT Portamento turns the portamento on/off. Please note that this parameter is only available on audio tracks. For more information, please see “5.3.1 AUDIO TRACKS AND MACHINES” on page 16. 11.4 SYN PAGES The parameters on the SYN pages control the selected SYN machine, and these parameters vary depend ing on what machine is selected. The SYN machines are different synthesis engines with unique functional ity. In the SYN machine section you also find the MIDI machine that lets you control external, MIDI equipped, gear. You can assign any SYN machine to any track. For more information, please see “A.2 SYN MACHINES” on page 89. Press [SYN] to access these parameter pages. The screen shot shows the first page for the FM Tone machine. 11.5 FLTR PAGE 1 The parameters on the FLTR page 1 control the filter, and these parameters vary depending on what FLTR machine is selected. The FLTR machines are a collection of different filters and EQ. On this page you also find the filter envelope. For more information, please see “A.3 FLTR MACHINES” on page 101. Press [FLTR] to access this parameter page. The screen shot shows the page for the Multi-mode FLTR machine. 11.6 FLTR PAGE 2 On FLTR page 2, you will find the parameters that control the base-width filter and a number of parameters that affects the selected filter machine on FLTR page 1. The base-width filter is basically a Highpass filter and a Lowpass filter connected in tandem. The filters BASE and WDTH parameters define the base-width filters frequency range. 11. TRACK PARAMETERS Examples of how the BASE and WDTH parameters affect the filter frequency range: FREQUENCY AMPLITUDE Base Width FREQUENCY AMPLITUDE Base Width FREQUENCY AMPLITUDE Base Width • With BASE set to 0, the filter functions as a low pass filter with WDTH adjusting the fre quency range. • With WDTH set to 127, the filter functions as a high pass filter with BASE adjusting the frequency range. • With WDTH set to 0, the filter functions as a band pass filter with BASE adjusting the frequency. • With BASE set to 0 and WDTH set to 127 the filter does not affect the sound. DEL Envelope delay sets the time before the attack phase of the filter envelope starts. This parameter is part of the filter envelope that controls the FLTR machine. You can also press and hold [FUNC] and then turn DATA ENTRY knob A to quickly access this parameter from FLTR page 1. This parameter only affects the selected filter machine on FLTR page 1. KEY.T Keytrack sets how much the filter cutoff frequency is affected by what note is playing. The higher the KEY.T setting, the more the filter opens up at higher notes. This parameter only affects the selected filter machine on FLTR page 1. BASE Sets the base frequency of the filter. WDTH Sets the frequency width above the base frequency. BW.RT BW Routing selects if the base-width filter should be routed before (Pre) or after (Post) the machine selectable filter in the audio path. RSET Filter Envelope Reset sets the filter envelope behavior. This parameter only affects the selected filter machine on FLTR page 1. ON resets the envelope for each consecutive trig (default). The envelopes attack phase is reset to zero. OFF does not reset the envelope for each consecutive trig. The envelopes attack phase continues from where it was left off. 11.7 AMP PAGE The AMP page controls parameters for the amplitude envelope, panning, and volume. Press [AMP] to access this parameter page.
Chunks share pages with neighboring sections; text before/after the section heading belongs to the adjacent sections.