13.5 SYSEX DUMP
13. SETTINGS MENU > 13.5 SYSEX DUMP · PDF p. 76–77 · OS 1.10D
# 13.5 SYSEX DUMP 13. SETTINGS MENU 13.4.3 CHANNELS This menu handles the MIDI channel configuration. TRACK 1–16 selects the dedicated MIDI channel that is used to receive or send (by turning the knobs) parameter data to or from a specific audio track. If configured as OFF, parameter data are neither received nor sent via MIDI. The sequencer data is always sent on the MIDI channel specified by the CHAN parameter on the SYN PARAMETER page. FX CONTROL CH selects the dedicated MIDI channel that is associated with the parameters on the DELAY, REVERB, CHORUS, and COMPRESSOR parameter pages together with the master overdrive, both for input and output. If configured as OFF, parameter data are neither sent nor received via MIDI. AUTO CHANNEL selects the MIDI channel that will give access to the currently active track. If an ex ternal MIDI keyboard connected to Digitone II sends MIDI data on this channel, the keyboard will con trol the active track. This is useful when for example quickly changing between the active audio tracks to play different presets. The Digitone II also uses the AUTO channel to record to the MIDI tracks from external MIDI controllers. PROGRAM CHG IN CH selects the MIDI channel that will listen for incoming program change mes sages. An AUTO setting will use the AUTO channel. Enable Digitone II to respond to program change messages in the MIDI SYNC menu. For more information, please see “13.4.1 SYNC” on page 74. PROGRAM CHG OUT CH selects the MIDI channel that will send program change messages when changing patterns. An AUTO setting will use the AUTO channel. Enable Digitone II to send program change messages in the MIDI SYNC. For more information, please see “13.4.1 SYNC” on page 74. 13.5 SYSEX DUMP In the SYSEX DUMP menu, project, pattern, and preset data can be sent and received via the MIDI OUT port or the USB port of the Digitone II. Select a menu option using [UP]/[DOWN] or the TRACK LEVEL knob. Press [YES] to open the highlighted menu selection. When receiving or sending SysEx data, the MIDI ports or the USB port of the Digitone II should be connect ed to the external sending/receiving device. 13.5.1 SYSEX SEND Here projects, patterns, and presets can be sent to an external device. 13. SETTINGS MENU The column to the left selects what will be backed up. Select the column using the [LEFT] arrow key. Use the [UP]/[DOWN] keys or the LEVEL/DATA knob to navigate in the column. The SysEx data send alternatives located in the column to the right will change depending on the selection made in the left column. Press the [RIGHT] arrow key to access this column. Use the [UP]/[DOWN] keys or the LEVEL/ DATA knob to select what will be sent. Press [YES] to initiate the SysEx send procedure. PROJECT will send the active project (settings, patterns, presets in the pool). PATTERN will send the selected pattern. • Backing up your data regularly is important! • Before initiating a SysEx send, first, make sure the receiving device is listening for data to be sent. 13.5.2 SYSEX RECEIVE Here projects, patterns, and presets can be received from an external device. Digitone II is continuously listening for SysEx data so you can at any time send backed up projects or patterns to the device. The column to the left selects what will be received. Select the column using the [LEFT] arrow key. Use the [UP]/[DOWN] keys or the LEVEL/DATA knob to navigate in the column. The SysEx data receive alternatives located in the column to the right will change depending on the selection made in the left column. Press the [RIGHT] arrow key to access this column. Use the [UP]/[DOWN] keys or the LEVEL/ DATA knob to select what will be received. Press [YES] to initiate the SysEx receive procedure. The Digitone II starts listening to incoming data. Press [NO] to stop listening. PATTERN will store a received pattern to the selected pattern slot. PRESETS will store a received preset to the selected slot of the +Drive library. The option ANY WHERE will place the preset in the first free slot available. To the right of the bank indication, the amount of free slots can be seen. 13.6 AUDIO ROUTING Here you find number of audio routing options that affects the Digitone II on a global level. 13.6.1 TO MAIN Use this option to customize which of the 16 tracks, 3 effects (Delay, Reverb, Chorus), and inputs that will send audio to the MAIN OUT outputs. Press [YES] then use [UP]/[DOWN] to switch between the setup pages. Use the [TRIG] keys to activate/deactivate the tracks, effects, and inputs that can send to main. Green keys signal send to main. Unlit keys signal do not send to main. 13.6.2 TO SEND FX Use this option to customize which of the 16 tracks, 2 effects (Delay, Chorus), and inputs that will send audio to the effects. Press [YES] then use [UP]/[DOWN] to switch between the setup pages. Use the [TRIG] keys to activate/deactivate the tracks, effects, and inputs that can send to FX. Green keys signal send to FX. Unlit keys signal do not send to FX.
Chunks share pages with neighboring sections; text before/after the section heading belongs to the adjacent sections.