13.6 AUDIO ROUTING
13. SETTINGS MENU > 13.6 AUDIO ROUTING · PDF p. 77–78 · OS 1.10D
# 13.6 AUDIO ROUTING 13. SETTINGS MENU The column to the left selects what will be backed up. Select the column using the [LEFT] arrow key. Use the [UP]/[DOWN] keys or the LEVEL/DATA knob to navigate in the column. The SysEx data send alternatives located in the column to the right will change depending on the selection made in the left column. Press the [RIGHT] arrow key to access this column. Use the [UP]/[DOWN] keys or the LEVEL/ DATA knob to select what will be sent. Press [YES] to initiate the SysEx send procedure. PROJECT will send the active project (settings, patterns, presets in the pool). PATTERN will send the selected pattern. • Backing up your data regularly is important! • Before initiating a SysEx send, first, make sure the receiving device is listening for data to be sent. 13.5.2 SYSEX RECEIVE Here projects, patterns, and presets can be received from an external device. Digitone II is continuously listening for SysEx data so you can at any time send backed up projects or patterns to the device. The column to the left selects what will be received. Select the column using the [LEFT] arrow key. Use the [UP]/[DOWN] keys or the LEVEL/DATA knob to navigate in the column. The SysEx data receive alternatives located in the column to the right will change depending on the selection made in the left column. Press the [RIGHT] arrow key to access this column. Use the [UP]/[DOWN] keys or the LEVEL/ DATA knob to select what will be received. Press [YES] to initiate the SysEx receive procedure. The Digitone II starts listening to incoming data. Press [NO] to stop listening. PATTERN will store a received pattern to the selected pattern slot. PRESETS will store a received preset to the selected slot of the +Drive library. The option ANY WHERE will place the preset in the first free slot available. To the right of the bank indication, the amount of free slots can be seen. 13.6 AUDIO ROUTING Here you find number of audio routing options that affects the Digitone II on a global level. 13.6.1 TO MAIN Use this option to customize which of the 16 tracks, 3 effects (Delay, Reverb, Chorus), and inputs that will send audio to the MAIN OUT outputs. Press [YES] then use [UP]/[DOWN] to switch between the setup pages. Use the [TRIG] keys to activate/deactivate the tracks, effects, and inputs that can send to main. Green keys signal send to main. Unlit keys signal do not send to main. 13.6.2 TO SEND FX Use this option to customize which of the 16 tracks, 2 effects (Delay, Chorus), and inputs that will send audio to the effects. Press [YES] then use [UP]/[DOWN] to switch between the setup pages. Use the [TRIG] keys to activate/deactivate the tracks, effects, and inputs that can send to FX. Green keys signal send to FX. Unlit keys signal do not send to FX. 13. SETTINGS MENU 13.6.3 USB IN Sets where the incoming audio from the class compliant device is routed to in the Digitone II’s signal path. This parameter is only available when USB CONFIG is set to USB AUDIO/MIDI. For more informa tion, please see “13.8.1 USB CONFIG” on page 80. MAIN The incoming audio is routed to the Digitone II’s main outputs. OFF No sound is routed from USB to the Digitone II. 13.6.4 USB OUT Sets from where in the Digitone II’s signal path, the outgoing audio is routed to the class compliant device. This parameter is only available when USB CONFIG is set to USB AUDIO/MIDI. For more informa tion, please see “13.8.1 USB CONFIG” on page 80. MAIN The outgoing audio is routed from the Digitone II’s Main out at the end of the signal path. L:T1–16/R:T1–16 The outgoing audio is routed from the selected track(s) Press a [TRIG] key twice to select a single track as a stereo source. The selected track’s [TRIG] key lights up white. Press first one [TRIG] key and then another to select two separate tracks as sources. The selected tracks’ [TRIG] keys lights up blue for left channel and red for right channel. The audio from each track is then summed to mono, routed out and sent separately on left and right channel. EXT The outgoing audio is routed straight from the Digitone II’s audio inputs IN L/R to the class com pliant device. OFF No audio is sent to the class compliant device. 13.6.5 INT TO MAIN Sets if Digitone II sends internal audio to the MAIN OUT and HEADPHONES OUT or not when used with a class compliant audio device. OFF No sound is sent to main out. ON Sound is always sent to main out. 13.6.6 USB TO MAIN [dB] Sets the amount of amplification of the sound that is streamed over USB to the Digitone II main out when used with a class compliant audio device. (0 dB–+18 dB) 13.6.7 PRE/POST FADER Sets if audio over USB should be pre or post the track level setting. Audio from the TRACK OUTPUTS is always without any effects. 13.7 PERSONALIZE Here you can customize a number of settings to fit you personal preferences. 13.7.1 LED INTENSITY Sets the brightness of the key LEDs and screen. Use the [LEFT]/[RIGHT] keys to change the setting. 13.7.2 LED BACKLIGHT Switches the key LEDs backlight on/off. Press and hold [SETTINGS] for a second and then press [TRIG 1–3] to set the intensity of the key LEDs and screen. Press and hold [SETTINGS] for a second and then press [TRIG 9] to toggle the key LEDs backlight on/off.
Chunks share pages with neighboring sections; text before/after the section heading belongs to the adjacent sections.