Knobwerk

← Search

13.8 SYSTEM

13. SETTINGS MENU > 13.8 SYSTEM · PDF p. 80–81 · OS 1.12

ERRATUMUSB CONFIG describes the USB AUDIO/MIDI option for the “Digitakt II”

§13.8.1 USB CONFIG (OS 1.12 manual) prints “USB AUDIO/MIDI sets the Digitakt II to send and receive audio and MIDI over USB. Select this option if you want to use the Digitakt II together with a class compliant USB audio host.” The sentence was copied from the Digitakt II manual; the option configures the Digitone II. The OS 1.10D manual named the Digitone II here.

Adjudicated in AUDIT.md + §13.8

Documented error in the printed manual. This project records contradictions instead of hiding them — the note stays in English, as all source-quoting content does.

13.8 SYSTEM — figure 1
PDF p. 80
13.8 SYSTEM — figure 2
PDF p. 80

The System menu contains a number of system related settings for the Digitone II.

13.8.1 USB CONFIG

Here you find settings related to USB audio and MIDI. Selecting one mode disables the other two modes.

OVERBRIDGE enables Overbridge functionality. For more information, please see “6.6 OVERBRIDGE” on page 20.

USB MIDI select this option if you wish to send and receive MIDI over USB.

USB AUDIO/MIDI sets the Digitakt II to send and receive audio and MIDI over USB. Select this option if you want to use the Digitakt II together with a class compliant USB audio host.

13.8.2 OS UPGRADE

Use this menu option when you want to upgrade the Digitone II OS. To send the OS file, use our free Elektron Transfer software. Elektron Transfer can be downloaded from the Elektron website.

The device sending the OS file must be connected to the USB port of Digitone II.

Please note that the Digitone II will not appear as an icon on your computer desktop.

  1. Download the Digitone II OS file from the Elektron website.
  2. Connect the Elektron device to the computer via USB.
  3. Open the Transfer application on your computer.
  4. On the Transfer CONNECTIONS page, set the MIDI IN and MIDI OUT ports to your Elektron device.
  5. On the Transfer DROP page, drag and drop the OS file. The OS file is then automatically transferred to the Elektron device and the OS update initiates. A progress bar is visible on device screen when receiving the OS.
  6. On your device. Press [YES] to confirm the OS update.

When the update is done, the Digitone II will reboot.

13.8.3 FORMAT +DRIVE

You have the possibility to erase all content of the +Drive. Once you have made your choice using the [LEFT]/[RIGHT] keys and confirmed by pressing [YES], a prompt will appear asking if you want to execute the formatting procedure. Press [YES] to proceed with the formatting.

PROJ+PST+KIT Erases all projects, presets, and kits.

13.8.4 MASTER TUNE

Sets the master tune for the whole device. Use [LEFT]/[RIGHT] to edit the value.