16. KEY COMBINATIONS
16. KEY COMBINATIONS · PDF p. 84–87 · OS 1.10D
# 16. KEY COMBINATIONS 16. KEY COMBINATIONS 16. KEY COMBINATIONS Use the key combinations below to quickly perform certain tasks. COPY/PASTE/CLEAR TRACK SEQUENCE (ALL TRIGS ON THE TRACK) When in GRID RECORDING mode. [FUNC] + [RECORD] to copy the active track’s sequence. [FUNC] + [STOP] to paste the copied track’s sequence to the active track. [FUNC] + [PLAY] to clear the active track’s sequence. TRIG When in GRID RECORDING mode [TRIG] + [RECORD] to copy the trig with it’s parameter locks. [TRIG] + [STOP] to paste the copied trig. [TRIG] + [PLAY] to clear the trig. PATTERN [FUNC] + [RECORD] to copy the active pattern. [FUNC] + [STOP] to paste the copied pattern to the active pattern. [FUNC] + [PLAY] to clear the active pattern. PRESET [TRK] + [RECORD] to copy the selected track’s preset. [TRK] + [STOP] to paste the copied preset to the selected track. [TRK] + [PLAY] to clear the selected track’s preset. SEQUENCER PAGE When in GRID RECORDING mode [PAGE] + [RECORD] to copy the active page. [PAGE] + [STOP] to paste the copied page to the active page. [PAGE] + [PLAY] to clear the active page. TRACK/PATTERN/BANK SELECT [TRK] + [TRIG 1-16] keys to select a track. [FUNC] + [PTN] + [TRIG 1-16] to choose a pattern bank [PTN] and [LEFT]/[RIGHT] and [TRIG 1-16] keys to select a bank/pattern. NAMING [FUNC] + [ARROW] (on the NAMING screen) to choose a letter. [FUNC] + [NO] (on the NAMING screen) to erase a letter. [FUNC] + [YES] (on the NAMING screen) to add a blank space. SAVING AND RELOADING PATTERN [FUNC] + [NO] to reload the active pattern. [FUNC] + [YES] to temporarily save the active pattern. PRESET When in GRID RECORDING mode. [TRIG] + [PRESET/KIT] save the sound of a trig as a preset, taking all parameter locks in consideration. [TRIG] + [YES] previews the trig. 16. KEY COMBINATIONS [FUNC] + [SETTINGS] saves the active project. [FUNC] + [YES] temporary saves the active pattern. [FUNC] + [NO] temporary reloads the active pattern. [PARAMETER] key + [NO] reloads all parameters on that parameter page from its last saved state [PARAMETER] key + [YES] randomizes parameters on that parameter page [TRK] + [TRIG1–16] + [NO] reloads the preset from its last saved state MENU ACCESS [FUNC] + [SONG] opens the SONG EDIT menu. [FUNC] + [TRIG PARAMETERS] opens the QUANTIZE menu. [FUNC] + [SYN] opens the MACHINE menu. [FUNC] + [FLTR] opens the SETUP menu. [FUNC] + [AMP] opens the SEQUENCER menu. [FUNC] + [FX] opens the SEND FX pages. [FUNC] + [MOD] opens the MIXER pages. [FUNC] + [PAGE] opens the pattern/track PAGE SETUP menu. [FUNC] + [KEYBOARD] opens the keyboard setup menu. SEQUENCER SETTINGS [FUNC] + [TEMPO] to tap tempo. [LEFT/RIGHT] to nudge tempo (when sequencer is playing). [FUNC] + [LEFT/RIGHT] moves all trigs a whole step, left or right (when in GRID RECORDING mode). [TRIG] key (hold) + [LEFT/RIGHT], opens the MICRO TIMING menu and sets the micro timing for the trig (when in GRID RECORDING mode). [FUNC] + [UP]/[DOWN] (In the PAGE SETUP menu) sets the TRACK LENGTH in musical increments from 2/16 to 64/64. [TEMPO] + [YES] toggles the metronome on/off. SEQUENCER RECORDING AND EDITING [RECORD] + [PLAY] starts LIVE RECORDING. [RECORD] + [STOP] activates STEP RECORDING. [RECORD] + double-press [PLAY] activates/deactivates QUANTIZE LIVE RECORDING. Hold [PAGE] and press [LEFT]/[RIGHT] to change sequencer page, or hold [PAGE] and press one of the lit [TRIGS] to jump to that page (when in GRID RECORDING mode). [TRIG] + [PAGE] or [TRK], and then turn a DATA ENTRY knob to add a parameter lock to all the existing trigs on a page. MUTES [FUNC] + [TRIG] keys mutes/unmutes one or several tracks. When in MUTE mode, press and hold [FUNC] + [TRIG] keys to prepare the track to be muted/unmuted. Releasing [FUNC] will perform the action. MODES [FUNC] + [TRK] enters GLOBAL MUTE mode. [FUNC] + double-press [TRK] enters PATTERN MUTE mode. [KEYBOARD] enters/exits KEYBOARD mode. [FUNC] + [UP]/[DOWN] accesses the TRIG mode menu [YES] + [PAGE] activates FILL mode for one pattern cycle. Pressing [PAGE] again deactivates FILL mode. 16. KEY COMBINATIONS When not in GRID RECORDING mode, press and hold [PAGE] to activate FILL Mode for as long as [PAGE] is held. Press and hold [PAGE] + [YES], and then release [PAGE] before you release [YES] to latch FILL mode. Press [PAGE] again to unlatch FILL mode. RESET PARAMETERS Press DATA ENTRY knob + [NO] to reset the parameter to the default value. [PARAMETER] key + [PLAY] to reset all the parameters in the selected parameter page to default values. PRESET/TRIG PREVIEW [FUNC] + [YES] (In the PRESET BROWSER/PRESET MANAGER) previews the highlighted preset. [TRIG] + [YES] (In GRID- and STEP RECORDING mode) previews the selected trig. SONG MODE [SONG] + [TRIG 1–16] to select song and enter SONG mode. [FUNC] + [SONG] to open the SONG EDIT screen. [SONG] + [LEFT] (when in SONG mode) to loop the currently playing row. Press [SONG] + [LEFT] again to stop looping the row and return to normal song playback. [SONG] + [UP] (when in SONG mode) to move the song pointer up one row. [SONG] + [DOWN] (when in SONG mode) to move the song pointer down one row. Press [SONG] (when in SONG mode) twice to open the SONG EDIT screen. [FUNC] + [RECORD] (when in the SONG EDIT screen) copies the selected row. [FUNC] + [STOP] (when in the SONG EDIT screen) pastes a previously copied row to the selected row. [FUNC] + [PLAY] (when in the SONG EDIT screen) resets the selected row to the pattern’s default BPM, length, and mute state. [FUNC] + [DOWN] (when in the SONG EDIT screen) adds a new row. [FUNC] + [UP] (when in the SONG EDIT screen) deletes the selected row. TRANSPOSE [FUNC] + [+]/[-] to transpose the current track up/down in semitones. [TRK] + [+]/[-] to transpose the current track up/down in semitones. [TRK] + [FUNC] + [+]/[-] to transpose the current track in octaves (+-12 semitones). [PTN] + [+]/[-] to transpose the pattern up/down in semitones. [PTN] + [FUNC] + [+]/[-] to transpose the pattern up/down in octaves (+-12 semitones). When in GRID RECORDING mode [TRIG] + [+]/[-] to transpose the current trig in semitones (destructively). NOTE EDIT [FUNC] + [LEFT]/[RIGHT] to go to the previous/next sequencer step that contains a note trig. [LEFT]/[RIGHT] to go the previous/next sequencer step regardless if it contains a trig or not. [FUNC] + [UP] to delete the highlighted note. [FUNC] + [DOWN] to add a note below the highlighted note. [FUNC] + [YES] to preview the selected step. [FUNC] + [PAGE] to navigate to the next pattern page. When in GRID RECORDING mode [TRIG] + [NOTE EDIT] to jump to that trig in Note Edit. TRACK [FUNC] + [VOICE] to toggle the current track’s unison mode on/off. [FUNC] + [ARP] to toggle the current track’s arpeggiator on/off. 17. TECHNICAL INFORMATION 17. TECHNICAL INFORMATION ELECTRICAL SPECIFICATIONS Impedance balanced audio outputs Main outputs level: +18 dBu peak Output impedance: 440 Ω unbalanced Headphones output Headphones out level: +18 dBu peak Output impedance: 36 Ω Audio inputs Input level: +18 dBu peak Audio input impedance: 21 kΩ Unit power consumption: 7 W typical Recommended power supply: PSU-3c (12 V DC, 2A) HARDWARE 128 × 64 pixel OLED screen MIDI In/Out/Thru with DIN Sync out 2 × 1/4” impedance balanced audio out jacks 2 × 1/4” balanced audio in jacks 1 × 1/4” stereo headphone jack 48 kHz, 24-bit D/A and A/D converters Hi-speed USB 2.0 port Power inlet: Center positive 5.5 × 2.5 mm barrel jack, 12 V DC, 1 A PHYSICAL SPECIFICATIONS Sturdy steel casing Dimensions: W 215 × D 176 × H 63 mm (8.5” × 6.9” × 2.5”) (including knobs and feet) Weight: approximately 1.48 kg (3.25 lbs) 100 × 100 mm VESA mounting holes. Use M4 screws with a max length of 7 mm. Maximum recommended ambient operating temperature: +40˚C (+104˚F)
Chunks share pages with neighboring sections; text before/after the section heading belongs to the adjacent sections.