Knobwerk
MAIN_VOLUMEVolumeLEVEL_DATA — Preset PoolLevel/DataSCREEN
T1 AUDIO · FM DRUM3/4
SYN3
AHOLD
BDEC
CPH.C
DLEV
ENRST
FNRM
G—
H—
ENC_AAENC_BBENC_CCENC_DDENC_EEENC_FFENC_GGENC_HHTRIG_PARAMS — QuantizeTRIGQuantizeSYN — MachineSYNMachineFLTR — SetupFLTRSetupAMP — SequencerAMPSequencerFX — Send FXFXSend FXMOD — MixerMODMixerPRESET_KIT — Perform▤PerformSETTINGS — Save Proj⚙Save ProjVOICE_SETUP — UnisonUnisonTEMPO — Tap TempoTap TempoRECORD — Copy○CopyPLAY — Clear▷ClearSTOP — Paste□PasteFUNCFUNCKEYBOARD — Kbd SetupKbd SetupTRK — Mute ModeTRKMute ModePTN — BankPTNBankSONGSONGYES — SaveYESSaveNO — ReloadNOReloadUP — Trig Mode^Trig ModeLEFT — uTime-<uTime-DOWN — Trig ModevTrig ModeRIGHT — uTime+>uTime+PAGE — Fill/SetupPAGEFill/SetupARP — ArpeggiatorArpeggiatorNOTE_EDIT — Note EditNote EditPLUS — Transpose++Transpose+MINUS — Transpose--Transpose-TRIG_11TRIG_22TRIG_33TRIG_44TRIG_55TRIG_66TRIG_77TRIG_88TRIG_99TRIG_1010TRIG_1111TRIG_1212TRIG_1313TRIG_1414TRIG_1515TRIG_1616
T1 AUDIO · FM DRUM3/4
SYN3
AHOLD
BDEC
CPH.C
DLEV
ENRST
FNRM
G—
H—

This panel is live — click keys to operate it. [FUNC] toggles the second layer, [TRK] then a trig key switches track, parameter-page keys cycle their pages, [UP]/[DOWN] browse, encoders inspect parameters.

PH.COP C PhaseSYN3 · knob C · fm_drum

Sets the phase reset for operator C. A value less than 90 means phase reset is on and the value is the phase start position in degrees; at 90 the operator resets at the peak of the waveform; set to OFF (value 91) operator C's phase is not reset.

A value less than 90 = phase reset on (value is the phase start position in degrees); 90 = resets at the peak of the waveform; OFF (value 91) = operator C's phase is not reset§a2-syn-machines
Getting StartedIntro, setup, and the quick start chapterProcedures85 step-by-step operations, played on the panelParameters300 parameters across all track types and machines
Digitone II Interactive Manual · Knobwerk