← Search

11.2 TRIG PARAMETERS PAGE

11. MIDI TRACK PARAMETERS > 11.2 TRIG PARAMETERS PAGE · PDF p. 58–59 · OS 1.40A

# 11.2 TRIG PARAMETERS PAGE

11. MIDI TRACK PARAMETERS
11. MIDI TRACK PARAMETERS
Here follows a description of the parameters that are on the MIDI tracks PARAMETER pages. The MIDI
tracks parameters are saved together with the pattern. The parameters may be locked to other settings on
any step of the pattern by first pressing and holding a [TRIG] key, then changing the parameters settings with
the DATA ENTRY knobs. For more information, please see “9.10.1 PARAMETER LOCKS” on page 43.
To use a track as a MIDI track, you must first assign a MIDI machine to it.
1.	 Press [FUNC] + [SYN] to open the MACHINE menu. Use the [UP] and [DOWN] keys to navigate to
the MIDI machine.
2.	 Press YES, to select the MIDI machine and assign it to the active track.
11.1 EDITING THE MIDI TRACK PARAMETERS
There are five PARAMETER pages for the MIDI tracks. Press the [PARAMETER] keys to access the MIDI
tracks PARAMETER pages. Use the DATA ENTRY knobs A-H to change the parameters. Press and hold a
[PARAMETER] key to see the values for all parameters on that page.
11.2 TRIG PARAMETERS PAGE
Set the actions for when a note is trigged. Change settings using the DATA ENTRY knobs. These general
settings affect note trigs placed in the sequencer.
Press [TRIG PARAMETERS] to access this parameter page.
11.2.1 NOT1
Note 1 sets the root note that should be sent by the MIDI track. (C0–G10)
11.2.2 NOT2–NOT4
Note 2–4 will add more notes, offset from the root note by the selected values, to a note trig. This makes
it possible for a MIDI track to send out chords that consists of up to 4 notes. If the root note is changed
the offset notes will transpose accordingly. A value of 0 will remove the offset note.
11.2.3 VEL
Trig Velocity controls the velocity of the notes the MIDI track sends out. A setting of 0 equals a NOTE
OFF command.
11.2.4 LEN
Trig Length sets the duration of the notes. When a note has finished playing a NOTE OFF command will
be sent. The INF setting equals infinite note length.
11.2.5 PROB
Trig Probability sets the probability that the trigs on the track plays or not. The probability outcome is
re-evaluated every time a trig is set to play. The default setting is 100%, meaning that all the trigs on the
track plays every time.
This parameter changes temporarily to display and control COND (Trig Condition) when you add a condi­
tional lock. For more information, please see “9.10.3 TRIG CONDITIONS AND CONDITIONAL LOCKS” on
page 44.
If you have placed a conditional lock on a trig in the sequencer, the trig condition overrides
the Trig Probability setting. For example, if you set PROB to 70% and a FILL trig condition
on a trig, that trig will only (and always) play when the Syntakt is in FILL mode. For more
information, please see “9.10.3 TRIG CONDITIONS AND CONDITIONAL LOCKS” on page
44.

11. MIDI TRACK PARAMETERS
11.2.6 LFO.T
LFO Trig controls if the LFO will be trigged or not.
11.3 SYN PAGE
Here you can set the MIDI channel that the MIDI track should use to send data. Bank and program change
values are also set here, together with a few standard CC parameters. The default value of the parameters
on this page is OFF, meaning they are disabled and will not send out any data. Press and hold [FUNC] and
then press the DATA ENTRY knobs to enable them. You can then use the DATA ENTRY knobs to set the
parameter values as usual. Disable the parameters by repeating the enabling procedure.
Press [SYN] once to access this parameter page.
11.3.1 CHAN
Channel sets the MIDI channel the track sends MIDI data to. If you set this parameter to OFF, it turns the
MIDI track off. Please note that this parameter cannot be parameter locked.
11.3.2 BANK
Bank sends a bank change message on CC 0 MSB.
11.3.3 SBNK
Sub Bank sends a bank change message on CC 32 LSB.
11.3.4 PROG
Program Change sends a Program Change message.
11.3.5 PB
Pitch Bend controls the pitch bend data sent on the MIDI track.
11.3.6 AT
Aftertouch controls the aftertouch data sent on the MIDI track.
11.3.7 MW
Mod Wheel controls the modulation wheel data sent on the MIDI track.
11.3.8 BC
Breath controller controls the breath control data sent on the MIDI track.
11.4 FLTR PAGE (CC VALUE)
Here you can set the values of up to eight assignable CC commands. The default value of the parameters
on this page is OFF, meaning they are disabled and will not send out any data. Press and hold [FUNC] and
then press the DATA ENTRY knobs to enable them. You can then use the DATA ENTRY knobs to set the
parameter values as usual. Disable the parameters by repeating the enabling procedure.
Press [FLTR] to access this parameter page.

Chunks share pages with neighboring sections; text before/after the section heading belongs to the adjacent sections.