14.7 GLOBAL FX/MIX

14. SETTINGS MENU > 14.7 GLOBAL FX/MIX · PDF p. 80 · OS 1.40A

# 14.7 GLOBAL FX/MIX

14. SETTINGS MENU
14.6.8 PRE/POST FADER
Sets if audio over USB should be pre or post the track level setting.
• Audio from the TRACK OUTPUTS is always without any effects.
• Tracks that are routed to not send audio to MAIN OUT still send audio on separate outputs
in Overbridge.
14.7 GLOBAL FX/MIX
In the GLOBAL FX/MIX menu, you can select several parameter pages whose parameters will (when select
ed) act on a global level instead of on a pattern level. Then the parameter’s settings on that page will not
only affect the active pattern but will also affect all the other patterns in the project. The parameters text/
value graphics are then inverted. Use the [LEFT]/[RIGHT] keys to select or deselect the parameter pages
you wish to function on a global level. For more information, please see “13. DELAY, REVERB AND MIXER
PARAMETERS” on page 68 and “12. FX TRACK PARAMETERS” on page 62.
14.8 PERSONALIZE
Here you can customize a number of settings to fit you personal preferences.
14.8.1 LED INTENSITY
Sets the brightness of the key LEDs and screen. Use the [LEFT]/[RIGHT] keys to change the setting
(LOW, MID, MAX).
Press [SETTINGS] + [TRIG 1–3] to set the intensity of the key LEDs and screen. [SET
TINGS] + [TRIG 9] toggles the key LEDs backlight on/off.
14.8.2 LED BACKLIGHT
Switches the key LEDs backlight on/off.
14.8.3 REMEMBER SUBPAGE
Will, when selected, remember which PARAMETER page’s subpage you last used and access this page
again the next time you press the same [PARAMETER] key. Use the [YES] key to toggle this setting.
(ON, OFF).
14.8.4 PAGE AUTOCOPY
Will, when set to on, automatically copy already placed trigs when extending the length of a pattern. If
a pattern consists of for example two pages and the pattern length is increased to four pages, the two
additional pattern pages are then copies of the first two pattern pages. For more information, please see
“10.11 PAGE SETUP MENU” on page 48.
14.8.5 NOTE PARAM
Sets the interaction behavior for the NOTE parameter on the TRIG PARAMETERS page.

Chunks share pages with neighboring sections; text before/after the section heading belongs to the adjacent sections.