14.8 PERSONALIZE
14. SETTINGS MENU > 14.8 PERSONALIZE · PDF p. 80–81 · OS 1.40A
# 14.8 PERSONALIZE 14. SETTINGS MENU 14.6.8 PRE/POST FADER Sets if audio over USB should be pre or post the track level setting. • Audio from the TRACK OUTPUTS is always without any effects. • Tracks that are routed to not send audio to MAIN OUT still send audio on separate outputs in Overbridge. 14.7 GLOBAL FX/MIX In the GLOBAL FX/MIX menu, you can select several parameter pages whose parameters will (when select ed) act on a global level instead of on a pattern level. Then the parameter’s settings on that page will not only affect the active pattern but will also affect all the other patterns in the project. The parameters text/ value graphics are then inverted. Use the [LEFT]/[RIGHT] keys to select or deselect the parameter pages you wish to function on a global level. For more information, please see “13. DELAY, REVERB AND MIXER PARAMETERS” on page 68 and “12. FX TRACK PARAMETERS” on page 62. 14.8 PERSONALIZE Here you can customize a number of settings to fit you personal preferences. 14.8.1 LED INTENSITY Sets the brightness of the key LEDs and screen. Use the [LEFT]/[RIGHT] keys to change the setting (LOW, MID, MAX). Press [SETTINGS] + [TRIG 1–3] to set the intensity of the key LEDs and screen. [SET TINGS] + [TRIG 9] toggles the key LEDs backlight on/off. 14.8.2 LED BACKLIGHT Switches the key LEDs backlight on/off. 14.8.3 REMEMBER SUBPAGE Will, when selected, remember which PARAMETER page’s subpage you last used and access this page again the next time you press the same [PARAMETER] key. Use the [YES] key to toggle this setting. (ON, OFF). 14.8.4 PAGE AUTOCOPY Will, when set to on, automatically copy already placed trigs when extending the length of a pattern. If a pattern consists of for example two pages and the pattern length is increased to four pages, the two additional pattern pages are then copies of the first two pattern pages. For more information, please see “10.11 PAGE SETUP MENU” on page 48. 14.8.5 NOTE PARAM Sets the interaction behavior for the NOTE parameter on the TRIG PARAMETERS page. 14. SETTINGS MENU CHRO: Turning DATA ENTRY knob A changes the parameter in chromatic steps. Pressing and turning DATA ENTRY knob A changes the parameter in steps that follows the set scale. SCALE: Turning DATA ENTRY knob A changes the parameter in steps that follows the set scale. Press ing and turning DATA ENTRY knob A changes the parameter in chromatic steps. For more information, please see “8.5.2 KEYBOARD SETUP MENU” on page 25 and “11.2 TRIG PAGE 1” on page 57. 14.8.6 LIVE REC OVERDUB When checked, allow you to add notes and locks in LIVE RECORDING mode to already placed trigs instead of replacing them. 14.8.7 PARAM LIVE REC This option lets you select whether parameter locks recorded in LIVE RECORDING mode will be added to all sequencer steps or only to steps that already contain a trig. There’s also a shortcut that lets you temporarily invert this setting. In LIVE RECORDING mode, hold [REC] while turning the knobs to reverse the behavior defined by PARAM LIVE REC for as long as [REC] is held. Once you release [REC], the behavior switches back to whatever is set by PARAM LIVE REC. 14.8.8 TRK SELECT This option lets you decide what happens when you press a trig key (when not in a recording mode) to change tracks. NORMAL Tracks are selected when pressing a [TRIG] key and plays a sound. SILENT Tracks are selected when pressing a [TRIG] key but does not play a sound. MANUAL Tracks are not selected when pressing a [TRIG] key but plays a sound. INVERTED Tracks are selected when pressing a [TRIG] key but does not play a sound. However [TRK] + [TRIG] plays the track’s sound and selects the track. In NORMAL, SILENT, and MANUAL, [TRK] + [TRIG] selects the track without playing a sound. 14.8.9 FX TRK SELECT This option sets how track selection behaves when you’re on the FX track and want to switch to another track (when not in a recording mode). NORMAL Tracks are selected when pressing a [TRIG] key and plays a sound. [TRK] + [TRIG 1–12] selects another track without playing a sound. MANUAL Tracks are not selected when pressing a [TRIG] key but plays a sound. [TRK] + [TRIG 1–12] selects another track without playing a sound. 14.9 SYSTEM The System menu contains USB CONFIG, LED INTENSITY, REMEMBER SUBPAGE, OS UPGRADE, FOR MAT +DRIVE, and CALIBRATION options for the Syntakt.
Chunks share pages with neighboring sections; text before/after the section heading belongs to the adjacent sections.