← Search

16. SETUP EXAMPLES

16. SETUP EXAMPLES · PDF p. 85 · OS 1.40A

# 16. SETUP EXAMPLES

16. SETUP EXAMPLES
16. SETUP EXAMPLES
The Syntakt likes to play with other machines. Whether it uses its ability to sync and play with legacy ma­
chines or controls other synthesizers: Syntakt gets along with other gear.
16.1 SYNTAKT WITH A MONOPHONIC BASS MACHINE
The DIN sync capabilities of the Syntakt allows you to use gear from yesteryear.
In this example, a legacy monophonic bass machine is used alongside the Syntakt. The Syntakt can stop,
start and control the tempo of the bass machine.
1.	 Prepare a bassline pattern on the bass machine.
2.	 Connect the output of the bass machine to the mixer using a Mono jack 6.3 mm male cable.
3.	 Connect the Syntakt audio outputs to the mixer using 2 x Mono or Stereo jack 6.3 mm male cables.
4.	 Use a DIN connector cable to connect the MIDI OUT of the Syntakt to the SYNC IN of the bass
machine.
5.	 On the Syntakt, press [SETTINGS], and then navigate to MIDI CONFIG > PORT CONFIG and set OUT
PORT CONFIG to DIN24.
6.	 Press [PLAY] on the Syntakt.
16.2 CONTROLLING A SYNTHESIZER USING THE MIDI TRACKS

Chunks share pages with neighboring sections; text before/after the section heading belongs to the adjacent sections.