10.8 QUANTIZE MENU
10. THE SEQUENCER > 10.8 QUANTIZE MENU · PDF p. 43 · OS 1.3.3
# 10.8 QUANTIZE MENU 10. THE SEQUENCER 10.8 QUANTIZE MENU The quantization affects all micro-timed and off-grid trigs on the sequencer’s tracks. Press [FUNC] + [KEY BOARD G#] to access this menu. Change settings with DATA ENTRY knob E and F. TRK affects all the trigs of the active track in real-time. The higher the quantize value, the more the trigs will be quantized. Press [TRIG 1–16] key to select the track to quantize. PATTERN affects all the trigs of all tracks in the pattern in real time. The higher the quantize value, the more the trigs will be quantized. Press [NO] to exit the menu. 10.9 PAGE SETUP MENU You can set the length and timing of the pattern and the tracks in this menu. The sequencer has up to 256 steps, spread across 16 sequencer pages with 16 steps per page. The SCALE menu has two modes. In PER PATTERN mode all tracks share the same length. In PER TRACK mode, each track can have different lengths. Press [FUNC] + [PAGE] to access the SCALE menu. Press [FUNC] + [YES] to toggle between the two SCALE modes. Use the DATA ENTRY knobs to adjust the settings. 10.9.1 PER PATTERN MODE In this mode, all tracks of the pattern share the same length and time signature. LENGTH sets the number of steps on the current pattern page. The leftmost number displays the number of steps on the active pattern page. If you use 17 steps or more in a pattern and GRID RE CORDING mode is active, the [PAGE] key is used to toggle between the different pattern pages. Press [FUNC] and then turn data entry knob E to change length in even steps of 16. SCALE controls the speed of track playback in multiples of the current tempo. For a setting of 1/8 plays back the track at one-eighth of the set tempo. 3/4 plays the track back at three-quarters of the tempo; 3/2 plays back the track twice as fast as the 3/4 setting. 2 makes the track play at twice the speed of the BPM. When you extend the length of a pattern, its trigs copies automatically over to the new steps. If a pattern consists of for example two pages and the pattern length is increased to four pages, the two additional pattern pages are then copies of the first two pattern pages. Press the [PAGE] key to change the total length of the pattern quickly. Press the [TRIG] keys to change the number of steps of the pattern quickly. 9.9.2 PER TRACK MODE In this mode, you can assign individual length and scale to the tracks of the pattern. Press [FUNC] + [YES] to switch between the two scale modes.
Chunks share pages with neighboring sections; text before/after the section heading belongs to the adjacent sections.