11.2 SRC

11. THE TRACK SETUP MENU > 11.2 SRC · PDF p. 52 · OS 1.3.3
# 11.2 SRC

11. THE TRACK SETUP MENU
11.1.11 MODULATION WHEEL
Opens a menu where you can assign up to four parameters to the MIDI mod wheel command (CC #1).
Press [YES] to open the menu. Selecting parameters and setting modulation depth work in the same
way as for PITCH BEND.
11.1.12 BREATH CONTROLLER
Opens a menu where you can assign up to four parameters to the MIDI breath controller command (CC
#2). Press [YES] to open the menu. Selecting parameters and setting modulation depth work in the same
way as for PITCH BEND.
11.2 SRC
Here you can select the SRC machine. Use [UP]/[DOWN] to select machine, and then press [YES] to
assign the selected machine to the track. From this page, you can also access and choose the two insert
FX machines for the track. Use [LEFT]/[RIGHT] to navigate to the desired machine category. For more
information, please see “A.2 SRC MACHINES” on page 84. Press [FUNC] + [SRC] to directly access this
page. There are no SRC machines available for SEND FX and MIX tracks.
11.3 FLTR
Here, you can select the order in which the filters and overdrive are routed in the signal path. Use [LEFT]/
[RIGHT] to select the order you want. For more information, please see “4. TONVERK SOUND ARCHITEC
TURE” on page 17. Press [FUNC] + [FLTR] to directly access this page.
11.3.1 ROUTING
Let’s you select the order in which the Overdrive, Base-width filter, and Multimode filter should be
arranged in the sound architecture. This setting is only available for audio tracks. For more information,
please see “4.1 AUDIO VOICES” on page 17.
11.4 AMP
On this page, you find several settings related to the amplifier. These settings are only available for audio
tracks.
Press [FUNC] + [AMP] to access this page.
Chunks share pages with neighboring sections; text before/after the section heading belongs to the adjacent sections.