← Search

12.4 SRC PAGE

12. AUDIO TRACK PARAMETERS > 12.4 SRC PAGE · PDF p. 55 · OS 1.3.3

# 12.4 SRC PAGE

12. AUDIO TRACK PARAMETERS
RTIM
Repeat Time sets the retrig rate. 1/16 is the nominal retrig rate, one trig per step. 1/32 corresponds to two
trigs per step and so on. To do triplets, for example, set the retrig rate to 1/12 (or 1/24).
RVEL
Repeat velocity sets the velocity curve fade-out and fade-in of the retrig. -1 corresponds to a complete
fade out during the set length, -0,5 fades out to half the velocity during the set length, 0 equals a flat
velocity curve with no fade, 0.5 fades into half velocity during the set length, and 1 fades in completely to
full velocity during the set length. Please note that the effects of the RVEL setting is also dependent on
the VEL setting on TRIG PAGE 1.
COND
(Trig Condition) when you add a conditional lock, COND sets the Trig Condition with which a set of con­
ditional rules can be applied to any trig, using a conditional parameter lock. For more information, please
see “10.10.2 TRIG CONDITIONS AND CONDITIONAL LOCKS” on page 45.
12.3 TRIG PAGE 2
On this page you access the portamento and set the portamento time. For more information, please see
“11.1.5 PORTAMENTO” on page 51.
PTIM
Portamento Time sets the time for the portamento.
PORT
Portamento turns the portamento on/off.
12.4 SRC PAGE
The parameters on the SOURCE page control the playback of the samples, and these parameters vary
depending on what machine is selected. The SRC machines are sound engines that use a particular subset
of the functionality of the sample playback engine. In this section, you also find the MIDI machine that lets
you control external, MIDI-equipped gear. You can assign any SRC machine to any of the eight voice tracks.
Press [FUNC] + [SRC] to select SRC machine. For more information, please see “A.2 SRC MACHINES” on
page 84.
The screenshot shows the Single Player machine.
12.5 FLTR PAGE 1
On FILTER page 1, you will find all parameters that control the Multimode filter and its associated envelope.
The Multimode filter lets you morph from a low-pass to band-pass to high-pass filter.
The parameters described here are for the Single Player, Multi Player, and the Subtracks SRC machines.
The Grainer and Shape machines have their own set of filter parameters on FLTR PAGE 1. For more infor­
mation, please see “A.2.4 GRAINER” on page 87, and “A.2.6 SHAPE” on page 93.

Chunks share pages with neighboring sections; text before/after the section heading belongs to the adjacent sections.