17.3 AUDIO ROUTING

17. SETTINGS MENU > 17.3 AUDIO ROUTING · PDF p. 76–77 · OS 1.3.3

# 17.3 AUDIO ROUTING

17. SETTINGS MENU
PROGRAM CHG IN CH selects the MIDI channel that will listen for incoming program change mes
sages. An AUTO setting will use the AUTO channel. Enable Tonverk to respond to program change
messages in the MIDI SYNC menu. For more information, please see “17.2.1 SYNC” on page 74.
PROGRAM CHG OUT CH selects the MIDI channel that will send program change messages when
changing patterns. An AUTO setting will use the AUTO channel. Enable Tonverk to send program
change messages in the MIDI SYNC. For more information, please see “17.2.1 SYNC” on page 74.
TRACKS 1–16 have their own dedicated MIDI channel, which is used to receive or send (by
turning the knobs) parameter data to or from a specific audio track. The MIDI channel num
ber corresponds to the track number.
• The sequencer data is always sent on the MIDI channel specified by the CHAN
parameter on the SRC PARAMETER page for the MIDI SCR machine.
• The selected MIDI channel for the Auto channel is only used for the Auto channel, and
the track that uses the same channel does not listen to any MIDI data.
17.3 AUDIO ROUTING
In this menu, you’ll find additional audio routing options for the external audio from the IN A/B inputs and
for audio over USB. The settings made here affects all the patterns in the project.
17.3.1 EXT INPUT GAIN
Sets the gain of the incoming audio from the IN A/B inputs.
17.3.2 EXT AUDIO IN
This parameter lets you select where to route the audio from the IN A/B inputs.
• OFF The audio from the IN A/B inputs is turned off
• PATTERN The audio routing set by the ROUT parameter on the Mix track’s SRC page in the pat
tern decides the audio routing.
• OUT AB The audio is routed to the A/B outputs.
• OUT CD The audio is routed to the C/D outputs.
• OUT EF The audio is routed to the E/F outputs.
17.3.3 USB AUDIO IN
This parameter lets you select where to route the external audio over USB.
• OFF The audio in over USB is turned off
• PATTERN The audio routing set by the ROUT parameter on the Mix track’s SRC page in the pat
tern decides the audio routing.
• OUT AB The audio is routed to the A/B outputs.
• OUT CD The audio is routed to the C/D outputs.
• OUT EF The audio is routed to the E/F outputs.
The settings you make using the EXT AUDIO IN and USB AUDIO IN parameters apply at
the project level and override any settings made with the ROUT parameter on the Mix
track’s SRC page For more information, please see “4.4.1 ROUTING TRACKS” on page
18. and “15.3 SRC PAGE” on page 69.

17. SETTINGS MENU
17.4 PERSONALIZE
Here you can customize a number of settings to fit you personal preferences.
17.4.1 LED BACKLIGHT
Switches the key LEDs’ backlight on and off.
17.4.2 LED INTENSITY
Sets the brightness of the key LEDs and screen. Use the [LEFT]/[RIGHT] keys to change the setting
(MIN, MID, MAX).
Press and hold [SETTINGS] for a second and then press [TRIG 1–3] to set the intensity of
the key LEDs and screen. Press and hold [SETTINGS] for a second and then press [TRIG
16] to toggle the key LEDs backlight on/off.
17.4.3 REMEMBER SUBPAGE
Will, when selected, remember which PARAMETER page’s subpage you last used and access this page
again the next time you press the same [PARAMETER] key. Use the [YES] key to toggle this setting.
(ON, OFF).
17.4.4 PAGE AUTOCOPY
Will, when set to on, automatically copy already placed trigs when extending the length of a pattern. If
a pattern consists of for example two pages and the pattern length is increased to four pages, the two
additional pattern pages are then copies of the first two pattern pages.
17.5 SYSTEM
The System menu contains a number of system related settings.
17.5.1 OS UPGRADE
Use this menu option to upgrade the Tonverk OS. If there is a new version of the Tonverk operating sys
tem, you are highly recommended to download and install the OS to keep your device up to date with the
latest functionality and fixes. You can download the OS file from the Elektron website’s Support section.
For more information about how to upgrade the Tonverk OS, please see “6.10 OS UPGRADE” on page
24.
17.5.2 SAVE DIAGNOSTICS
This option creates a diagnostics file of the machine state. The file can be used in case the device is not
functioning correctly to gather information that helps to pinpoint the problem. The file is saved in the
DIAGNOSTICS folder of the SD card, and is called “system-xxxxxxxxxx.log”.
17.5.3 DEVICE INFO
Here you can see the device’s serial number, current OS version, and current UI firmware version.

Chunks share pages with neighboring sections; text before/after the section heading belongs to the adjacent sections.