18.4 EXIT (REBOOT)
18. RESCUE MODE > 18.4 EXIT (REBOOT) · PDF p. 78–79 · OS 1.3.3
# 18.4 EXIT (REBOOT) 18. RESCUE MODE 18. RESCUE MODE In this meny you find tools that can help you recover your device to a working state if you have problems with your Tonverk. To access this menu, hold down the [FUNC] key while powering up Tonverk. To choose the different alternatives, press the corresponding [TRIG] key. 18.1 RESET ACTIVE PROJ. This option makes a backup of the active project and loads a new empty project. To reset the active project, press [TRIG 1]. 18.2 RECOVERY OS UPGRADE This option lets you load a previously prepared recovery OS and replace the currently loaded OS. You can use any Tonverk OS version as the recovery OS. 1. Download or locate a previously downloaded OS file you want to use as a recovery OS and name the file OS.swu 2. Connect an external SD card reader to a computer and insert the Tonverk SD card in the card reader. 3. Copy the recovery OS file to Tonverk’s SD card and place the file at the root of the SD card’s file structure (not inside any folder). 4. Safely eject the SD card reader from the computer. Please refer to your computer’s documentation on how to perform this procedure. 5. Insert the Tonverk SD card back in the Tonverk and power it up while pressing the [FUNC] key. 6. In the RESCUE MODE menu, press [TRIG 2] to load the revocery OS. 7. When the recovery OS is loaded, press [YES] to return to the RESCUE MODE menu. 8. Press [TRIG 4] to exit the RESCUE MODE menu and reboot the device using the recovery OS. Use the OS UPGRADE option in the SETTINGS > SYSTEM menu if you wish to upgrade the device to a standard OS. 18.3 SAVE DIAGNOSTICS This option creates a diagnostics file of the machine state. The file can be used in case the device is not functioning correctly to gather information that helps to pinpoint the problem. The file is saved in the DIAG NOSTICS folder of the SD card, and is called “systemlog-rescue.log”. To create and save a diagnostics file, press [TRIG 3]. After the diagnostics script has run, press [YES] to return to the RESCUE MODE menu. 18.4 EXIT (REBOOT) Press [TRIG 4] to exit the RESCUE MODE menu and reboot the device. 19. KEY COMBINATIONS 19. KEY COMBINATIONS Use the key combinations below to perform specific tasks quickly. COPY/PASTE/CLEAR TRACK SEQUENCE (ALL TRIGS ON THE TRACK) When in GRID RECORDING mode. [FUNC] + [RECORD] to copy the active track’s sequence. [FUNC] + [STOP] to paste the copied track’s sequence to the active track. [FUNC] + [PLAY] to clear the active track’s sequence. TRIG When in GRID RECORDING and LIVE RECORDING mode [TRIG] + [RECORD] to copy the trig with its parameter locks. [TRIG] + [STOP] to paste the copied trig. [TRIG] + [PLAY] to clear all parameter locks on the trig. PATTERN [FUNC] + [RECORD] to copy the active pattern. [FUNC] + [STOP] to paste the copied pattern to the active pattern. [FUNC] + [PLAY] to clear the active pattern. PRESET [TRK] + [RECORD] to copy the selected track’s preset. [TRK] + [STOP] to paste the copied preset to the selected track. [TRK] + [PLAY] to clear the selected track’s preset. SEQUENCER PAGE When in GRID RECORDING mode [PAGE] + [RECORD] to copy the active page. [PAGE] + [STOP] to paste the copied page to the active page. [PAGE] + [PLAY] to clear the active page. SUBTRACKS + SUPERTACK SEQUENCE (ALL TRIGS ON ALL THESE TRACKS FOR A SUBTRACKS MACHINE) When in STEP EDIT mode. [FUNC] + [RECORD] to copy all trigs from the eight subtracks and the supertrack. [FUNC] + [STOP] to paste the copied subtracks’ and spertrack’s trigs to the active track. [FUNC] + [PLAY] to clear all trigs from the eight subtracks and the supertrack. UNDO/REDO [FUNC] + [NO] to undo paste/clear operations of track sequences and patterns. [FUNC] + [YES] to redo a previously performed Undo operation. TRACK/SUBTRACK/PATTERN/BANK SELECT [TRK] + [TRIG 1-16] keys to select a track. [TRK] + [SUBTRACKS] or just [SUBTRACKS] to select a subtrack (on a track with a Subtracks SRC ma chine assigned to it.) [PTN] and [KEYBOARD] (bottom row), and [TRIG 1-16] keys to select a bank/pattern. NAMING [FUNC] + [ARROW] (on the NAMING screen) to choose a letter.
Chunks share pages with neighboring sections; text before/after the section heading belongs to the adjacent sections.