APPENDIX A: MACHINES
APPENDIX A: MACHINES · PDF p. 84 · OS 1.3.3
# APPENDIX A: MACHINES APPENDIX A: MACHINES APPENDIX A: MACHINES A machine is a module within Tonverk that has specific functionality. A machine can be replaced with anoth er machine of the same category. For example different synthesis engines or effects. Every machine has a particular set of parameters tailored to give you the most relevant and useful sound-shaping possibilities for that particular machine. For more information, please see “5.3.2 AUDIO TRACKS (TRACK 1–8)” on page 20. Use the [UP]/[DOWN] keys to select the parameter group's pages. You can also press a [PARAMETER PAGE] key repeatedly to cycle through the parameter pages in that group. Press and hold a [PARAMETER PAGE] key to see the values for all parameters on that page. A.1 ASSIGNING MACHINES TO THE ACTIVE TRACK 1. Press [TRK] + [1–16] to select the active track. 2. Press [FUNC] + [SRC] or [FUNC] + [FX] to open the MACHINE setup menus with the relevant machine category selected. 3. Use [UP]/[DOWN] to select the machine, and then press [YES] to assign the selected machine to the track. The rest of this appendix lists the machine-specific parameters on the SRC and FX pages. The selected machine determines the parameters available. A.2 SRC MACHINES The SRC machines are sound engines that use a particular subset of the functionality of the sample play back engine. In this section, you also find the MIDI machine that lets you control external, MIDI-equipped gear and the Shape machine that can shape the sound on Bus and Send FX tracks. You can assign any SRC machine (apart from the Shape machine that can only be assigned to Bus and Send FX tracks) to any of the Audio/MIDI tracks (Track 1–8). Additionally, you can also assign MIDI machines to the Bus tracks (Track 9–12). Press [SRC] to access these parameter pages. A.2.1 SINGLE PLAYER The Single Player machine plays a selected sample (mono or stereo) linearly (forward, reversed, or looped). This machine is eight voice polyphonic. When you select this machine you should use the SAM PLE SLOT parameter to assign a sample to the machine. Press [SRC] to access this parameter page. TUNE Tune (DATA ENTRY knob A) sets the pitch of the sample. The knob works in a bipolar fashion, and a value of 0 leaves the pitch unchanged. The range is +/- 5 octaves. Press and hold [FUNC], and then turn the DATA ENTRY knob to snap parameter values to full octaves. Press and turn the DATA ENTRY knob to snap parameter values to semitones. PLAY MODE Play Mode (DATA ENTRY knob B) sets the play mode of the sample. It controls how the sample will be played back when it is trigged.
Chunks share pages with neighboring sections; text before/after the section heading belongs to the adjacent sections.