Knobwerk

← All procedures

Set up and start Tonverk

MAIN_VOLUMEVolumeLEVEL_DATALevel / DataPRESET — File▤FileSETTINGS — Save Proj⚙Save ProjSAMPLING — Samples≈SamplesTEMPO — Tap Tempo△Tap TempoARP — Toggle On/OffARPToggle On/OffCHORD — Toggle On/OffCHORDToggle On/OffSONG — Toggle On/OffSONGToggle On/OffSCREENTonverkENC_AAENC_BBENC_CCENC_DDENC_EEENC_FFENC_GGENC_HHFUNCFUNCTRK — PerformTRKPerformPTN — TransitionPTNTransitionMUTE — RoutingMUTERoutingREC — Copy○CopyPLAY — Clear▷ClearSTOP — Paste□PasteTRIG_PARAMS — SetupTRIGSetupSRC — SetupSRCSetupFLTR — SetupFLTRSetupAMP — SetupAMPSetupFX — SetupFXSetupMOD — SetupMODSetupKB_CS1 — RecallC#1RecallKB_DS1 — MemorizeD#1MemorizeKB_FS1 — MetronomeF#1MetronomeKB_GS1 — QuantizeG#1QuantizeKB_AS1 — ScaleA#1ScaleSTEP_EDIT▰▱PLUS — Transpose+TransposeMINUS — Transform-TransformYES — RedoYESRedoNO — UndoNOUndoUP — Sequence Lane^Sequence LaneLEFT — uTime-<uTime-DOWN — Trig ModevTrig ModeRIGHT — uTime+>uTime+FILL — Fill EditFILLFill EditPAGE — Page SetupPAGEPage SetupKB_C1C1KB_D1D1KB_E1E1KB_F1F1KB_G1G1KB_A1A1KB_B1B1KB_C2C2TRIG_11TRIG_22TRIG_33TRIG_44TRIG_55TRIG_66TRIG_77TRIG_88TRIG_99TRIG_1010TRIG_1111TRIG_1212TRIG_1313TRIG_1414TRIG_1515TRIG_1616
1 / 6
  1. NotePlug the supplied DC adapter into a power outlet, then connect its USB cable to one of Tonverk's USB ports.
  2. NoteConnect OUT A/B to your mixer or amplifier, or plug headphones into the HEADPHONES output.
  3. NoteTo control Tonverk from a computer, connect a USB cable between the computer and one of Tonverk's USB ports.
  4. NoteTo control Tonverk over MIDI, connect the MIDI OUT of the sending device to Tonverk's MIDI IN.
  5. NoteConnect an audio source to IN A/B (or over USB) to process or sample external audio.
  6. NoteSwitch on all units. Press the POWER switch on the rear panel to switch Tonverk on.

Result: Tonverk is connected and powered on.

Source: manual §3.3