14. SEND FX TRACK PARAMETERS

The parameters that are available on the Send FX tracks are explained in this chapter. For more information about Send FX tracks, please see ”5.3.4 SEND FX TRACKS (TRACK 13–15)” on page 20. On the FX parameter pages, you have parameters for selecting and editing the Send FX track’s FX machines. On the MOD pages, you have two LFOs dedicated as modulation sources for the track’s parameters.

14.1 EDITING THE SEND FX TRACK PARAMETERS

Press [TRK] + [TRIG 13–15] to select the Send FX track you want to edit. There are three PARAMETER pages for the SEND FX tracks. Press [TRIG], [FX], and [MOD] to access the tracks PARAMETER page groups. Use the [UP]/[DOWN] keys to access the parameter group’s pages. You can also press a [PARAMETER PAGE] key repeatedly to cycle through that group’s parameter pages. Press and hold a [PARAMETER PAGE] key to see the values for all parameters on that page. The track parameters can be locked to other settings at any step of the pattern by first pressing and holding the [TRIG] key, then adjusting the parameter settings with the DATA ENTRY knobs. For more information, please see “10.10.1 PARAMETER LOCKS” on page 44. If you press [TRIG 13–15] to select a Send FX track without first pressing and holding [TRK], you can still use the [KEYBOARD] to play the previously selected audio track.

14.2 TRIG PAGE

Here you set the options for notes that are trigged. This is also where you select trig conditions. Press the [TRIG PARAMETERS] key to access the menu. Change settings using the DATA ENTRY knobs. These general settings affect note trigs placed on the sequencer.

NOTE

Trig Note sets the pitch of the note when trigged. When in LIVE RECORDING mode and using the [KEYBOARD] to enter notes, the pitch of the [TRIG] keys played will override this setting. The NOTE parameter is not available for tracks that have the Subtracks SRC machine assigned.

VEL

Trig Velocity sets the velocity of the sequencer’s note trigs.

LEN

Trig Length sets the length of the note trig. In LIVE RECORDING mode, the duration of pressing the [TRIG] keys overrides this general setting.

PROB

Trig Probability sets the probability that the trigs on the track play or not. The probability outcome is re-evaluated every time a trig is set to play. The default setting is 100%, meaning that all the trigs on the track play every time. This parameter can be parameter locked, which lets you give separate trigs their own probability.

RTRG

Retrig enables multiple trig repeats on placed trigs. Use DATA ENTRY knob A to turn retrig on or off. For information on setting retrig locks on specific trigs in the sequencer, please see “10.7 RETRIGS” on page 43.

RTIM

Repeat Time sets the retrig rate. 1/16 is the nominal retrig rate, one trig per step. 1/32 corresponds to two trigs per step and so on. To do triplets, for example, set the retrig rate to 1/12 (or 1/24).