16.4 TRANSFERRING SAMPLES FROM A COMPUTER TO TONVERK

Tonverk can load and play WAV and AIFF audio files of any bit depth and sample rate. It will play them back at a maximum of 32-bit float, 48 kHz. Samples are stored on the SD card, and the size and number of those samples are limited only by the available free space on the SD card

1. Connect Tonverk to a computer using a USB cable attached to one of Tonverk’s USB ports.
2. In Tonverk, navigate to SETTINGS > USB DISK MODE, and then press [YES].
3. In the popup window, press [YES], but note that device playback will stop.
4. Tonverk’s SD card should now show up in your computer as a USB device. Click the Tonverk USB device on your computer to access the contents of the SD card.
5. On the SD card, navigate to the User/Samples folder and copy your sample files there. You can also create subfolders within the Samples folder and copy the files there.
6. Once all files are copied, safely eject the Tonverk USB device from the computer. Please refer to your computer’s documentation on how to perform this procedure.
7. On your device. Press [NO] to exit USB disk mode.

• We recommended that you save and add content only to the USER folder on the SD card.

This folder also contains the default destinations for saving projects, presets, samples, and instruments.

• If you delete or move samples (or a folder containing samples) on the SD card, it will affect all projects that use the deleted or moved samples, and the samples will be missing from these projects.
• The write-protect switch on the SD card must be set to OFF if you want to write to the card.

You can also use a smartphone or tablet to upload samples to Tonverk’s SD card.