17.3 AUDIO ROUTING
17. SETTINGS MENU > 17.3 AUDIO ROUTING · PDF p. 76–77 · OS 1.3.3
# 17.3 AUDIO ROUTING 17. SETTINGS MENU PROGRAM CHG IN CH selects the MIDI channel that will listen for incoming program change mes sages. An AUTO setting will use the AUTO channel. Enable Tonverk to respond to program change messages in the MIDI SYNC menu. For more information, please see “17.2.1 SYNC” on page 74. PROGRAM CHG OUT CH selects the MIDI channel that will send program change messages when changing patterns. An AUTO setting will use the AUTO channel. Enable Tonverk to send program change messages in the MIDI SYNC. For more information, please see “17.2.1 SYNC” on page 74. TRACKS 1–16 have their own dedicated MIDI channel, which is used to receive or send (by turning the knobs) parameter data to or from a specific audio track. The MIDI channel num ber corresponds to the track number. • The sequencer data is always sent on the MIDI channel specified by the CHAN parameter on the SRC PARAMETER page for the MIDI SCR machine. • The selected MIDI channel for the Auto channel is only used for the Auto channel, and the track that uses the same channel does not listen to any MIDI data. 17.3 AUDIO ROUTING In this menu, you’ll find additional audio routing options for the external audio from the IN A/B inputs and for audio over USB. The settings made here affects all the patterns in the project. 17.3.1 EXT INPUT GAIN Sets the gain of the incoming audio from the IN A/B inputs. 17.3.2 EXT AUDIO IN This parameter lets you select where to route the audio from the IN A/B inputs. • OFF The audio from the IN A/B inputs is turned off • PATTERN The audio routing set by the ROUT parameter on the Mix track’s SRC page in the pat tern decides the audio routing. • OUT AB The audio is routed to the A/B outputs. • OUT CD The audio is routed to the C/D outputs. • OUT EF The audio is routed to the E/F outputs. 17.3.3 USB AUDIO IN This parameter lets you select where to route the external audio over USB. • OFF The audio in over USB is turned off • PATTERN The audio routing set by the ROUT parameter on the Mix track’s SRC page in the pat tern decides the audio routing. • OUT AB The audio is routed to the A/B outputs. • OUT CD The audio is routed to the C/D outputs. • OUT EF The audio is routed to the E/F outputs. The settings you make using the EXT AUDIO IN and USB AUDIO IN parameters apply at the project level and override any settings made with the ROUT parameter on the Mix track’s SRC page For more information, please see “4.4.1 ROUTING TRACKS” on page 18. and “15.3 SRC PAGE” on page 69. 17. SETTINGS MENU 17.4 PERSONALIZE Here you can customize a number of settings to fit you personal preferences. 17.4.1 LED BACKLIGHT Switches the key LEDs’ backlight on and off. 17.4.2 LED INTENSITY Sets the brightness of the key LEDs and screen. Use the [LEFT]/[RIGHT] keys to change the setting (MIN, MID, MAX). Press and hold [SETTINGS] for a second and then press [TRIG 1–3] to set the intensity of the key LEDs and screen. Press and hold [SETTINGS] for a second and then press [TRIG 16] to toggle the key LEDs backlight on/off. 17.4.3 REMEMBER SUBPAGE Will, when selected, remember which PARAMETER page’s subpage you last used and access this page again the next time you press the same [PARAMETER] key. Use the [YES] key to toggle this setting. (ON, OFF). 17.4.4 PAGE AUTOCOPY Will, when set to on, automatically copy already placed trigs when extending the length of a pattern. If a pattern consists of for example two pages and the pattern length is increased to four pages, the two additional pattern pages are then copies of the first two pattern pages. 17.5 SYSTEM The System menu contains a number of system related settings. 17.5.1 OS UPGRADE Use this menu option to upgrade the Tonverk OS. If there is a new version of the Tonverk operating sys tem, you are highly recommended to download and install the OS to keep your device up to date with the latest functionality and fixes. You can download the OS file from the Elektron website’s Support section. For more information about how to upgrade the Tonverk OS, please see “6.10 OS UPGRADE” on page 24. 17.5.2 SAVE DIAGNOSTICS This option creates a diagnostics file of the machine state. The file can be used in case the device is not functioning correctly to gather information that helps to pinpoint the problem. The file is saved in the DIAGNOSTICS folder of the SD card, and is called “system-xxxxxxxxxx.log”. 17.5.3 DEVICE INFO Here you can see the device’s serial number, current OS version, and current UI firmware version.
チャンクは隣接セクションとページを共有します。見出し前後のテキストは隣のセクションのものです。