12.8 FX MIXER

12. FX AND MIXER PARAMETERS > 12.8 FX MIXER · PDF 第 70 · OS 1.10D

# 12.8 FX MIXER

12. FX AND MIXER PARAMETERS
12.8 FX MIXER
(MIXER PAGE 4)
On the FX MIXER page you can set the levels of the send effects and master overdrive.
VOL
Pattern Volume sets the patterns overall audio level. At a parameter setting of 100, you have unity gain.
Below that, the signal is attenuated. Above that, the signal is amplified. This parameter can be used to
balance the volume between different patterns and is saved together with the kit. Use LEVEL/DATA to
adjust the settings.
DEL
Delay Mix Volume Sets the master volume of the delay.
REV
Reverb Mix Volume sets the master volume of the reverb.
CHR
Chorus Mix Volume sets the master volume of the chorus.
MOVD
Master Overdrive sets overall amount of overdrive for the audio tracks in the kit. Use LEVEL/DATA to
adjust the settings.
12.9 EXTERNAL MIXER
(MIXER PAGE 5)
The EXTERNAL MIXER page contains a number of parameters related to when you use the IN L/R inputs
to process incoming audio.
IN LR
In Level sets the level of the audio from the IN L/R audio input.
DUAL
Dual Mono sets if the inputs are processed as a single stereo input or as two separate mono inputs.
Setting this parameter to ON changes the rest of the parameters from controlling both inputs to sep
arate controls for channel L and R split over two mixer pages The BAL parameters changes to a PAN
parameter.
BAL
Balance sets the balance of the audio from the INPUT L and INPUT R inputs in the stereo field.

章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。