12.9 EXTERNAL MIXER
12. FX AND MIXER PARAMETERS > 12.9 EXTERNAL MIXER · PDF 第 70–72 · OS 1.10D
# 12.9 EXTERNAL MIXER 12. FX AND MIXER PARAMETERS 12.8 FX MIXER (MIXER PAGE 4) On the FX MIXER page you can set the levels of the send effects and master overdrive. VOL Pattern Volume sets the patterns overall audio level. At a parameter setting of 100, you have unity gain. Below that, the signal is attenuated. Above that, the signal is amplified. This parameter can be used to balance the volume between different patterns and is saved together with the kit. Use LEVEL/DATA to adjust the settings. DEL Delay Mix Volume Sets the master volume of the delay. REV Reverb Mix Volume sets the master volume of the reverb. CHR Chorus Mix Volume sets the master volume of the chorus. MOVD Master Overdrive sets overall amount of overdrive for the audio tracks in the kit. Use LEVEL/DATA to adjust the settings. 12.9 EXTERNAL MIXER (MIXER PAGE 5) The EXTERNAL MIXER page contains a number of parameters related to when you use the IN L/R inputs to process incoming audio. IN LR In Level sets the level of the audio from the IN L/R audio input. DUAL Dual Mono sets if the inputs are processed as a single stereo input or as two separate mono inputs. Setting this parameter to ON changes the rest of the parameters from controlling both inputs to sep arate controls for channel L and R split over two mixer pages The BAL parameters changes to a PAN parameter. BAL Balance sets the balance of the audio from the INPUT L and INPUT R inputs in the stereo field. 12. FX AND MIXER PARAMETERS VOL Pattern Volume sets the patterns overall audio level. At a parameter setting of 100, you have unity gain. Below that, the signal is attenuated. Above that, the signal is amplified. This parameter can be used to balance the volume between different patterns and is saved together with the kit. Use LEVEL/DATA to adjust the settings.. DEL Delay send sets the amount of sound from the IN L/R audio input that is sent through to the delay effect. For more information, please see “12.2 DELAY” on page 65. REV Rev send sets the amount of sound from the IN L/R audio input that is sent through to the reverb effect. For more information, please see “12.3 REVERB” on page 66. CHO Chorus send sets the amount of sound from the IN L/R audio input that is sent through to the chorus effect. For more information, please see “12.4 CHORUS” on page 67. If you set DUAL to ON, the first EXTERNAL MIXER page will control the audio from INPUT L. You also get an additional EXTERNAL MIXER page (6) that control the audio from IN PUT R. After you load/reload a project, or after pressing [STOP] + [STOP], you must trig or play an audio track to activate the effects for the External in mixer. 13. SETTINGS MENU 13. SETTINGS MENU The SETTINGS menu offers settings that affect Digitone II and can also be used to manage Projects. Press [SETTINGS] to access the SETTINGS menu. Scroll the list by using [UP]/[DOWN] or the LEVEL/ DATA knob. Open a highlighted menu by pressing [YES]. 13.1 PROJECT 13.1.1 LOAD PROJECT Load Project opens a project selection screen where you can choose a project to load. If you wish to create a new project, select CREATE NEW at the very bottom of the list. The new project will be a blank slate. If you load a new project it will replace the active project. Be sure to save your active project before you load another project. 13.1.2 SAVE PROJECT AS Save Project opens a project selection screen where you choose a slot to save the active project to. You can also press [FUNC] + [SETTINGS] to save and overwrite the current project. 13.1.3 MANAGE PROJECTS Manage Projects launches the PROJECT MANAGER menu. Selecting a project in this menu and pressing the [RIGHT] arrow key will bring up a list of commands. • CLEAR Resets the project slot to a clean state. • DELETE Removes the project from the slot. • RENAME Opens a NAMING screen where you can rename the project file. • LOAD FROM Loads the selected project. This will replace the active project! • SAVE TO Saves the active project to the selected slot. • TOGGLE Toggles write protection on or off. Write protected projects cannot be overwritten, re named or erased. A lock symbols in front of the project name shows that the project is write protected. • INIT NEW Initializes an empty file slot with a clean project. This option is only available for empty project slots. • PURGE ALL Purges (removes) all presets from the pool that are not used in any pattern in the project from the RAM memory. The presets are not removed from the +Drive library. This option is only available when you select the currently loaded project.
章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。