13.8 SYSTEM
13. SETTINGS MENU > 13.8 SYSTEM · PDF 第 80–81 · OS 1.10D
# 13.8 SYSTEM 13. SETTINGS MENU 13.8 SYSTEM The System menu contains a number of system related settings for the Digitone II. 13.8.1 USB CONFIG Here you find settings related to USB audio and MIDI. Selecting one mode disables the other two modes. USB MIDI select this option if you wish to send and receive MIDI over USB. USB AUDIO/MIDI sets the Digitone II to send and receive audio and MIDI over USB. Select this option if you want to use the Digitone II together with a class compliant USB audio host. 13.8.2 OS UPGRADE Use this menu option when you want to upgrade the Digitone II OS. To send the OS file, use our free Elektron Transfer software. Elektron Transfer can be downloaded from the Elektron website. The device sending the OS file must be connected to the USB port of Digitone II. Please note that the Digitone II will not appear as an icon on your computer desktop. 1. Download the Digitone II OS file from the Elektron website. 2. Connect the Elektron device to the computer via USB. 3. Open the Transfer application on your computer. 4. On the Transfer CONNECTIONS page, set the MIDI IN and MIDI OUT ports to your Elektron device. 5. On the Transfer DROP page, drag and drop the OS file. The OS file is then automatically trans ferred to the Elektron device and the OS update initiates. A progress bar is visible on device screen when receiving the OS. 6. On your device. Press [YES] to confirm the OS update. When the update is done, the Digitone II will reboot. 13.8.3 FORMAT +DRIVE You have the possibility to erase all content of the +Drive. Once you have made your choice using the [LEFT]/[RIGHT] keys and confirmed by pressing [YES], a prompt will appear asking if you want to exe cute the formatting procedure. Press [YES] to proceed with the formatting. PROJ+PST+KIT Erases all projects, presets, and kits. 13.8.4 MASTER TUNE Sets the master tune for the whole device. Use [LEFT]/[RIGHT] to edit the value. 14. STARTUP MENU 14. STARTUP MENU To access this menu, hold down the [FUNC] key while powering up the Digitone II. From here you can per form a variety of tasks. To choose the different alternatives, press the corresponding [TRIG] key. 14.1 TEST MODE To enter this mode, press the [TRIG 1] key. For testing purposes, a short sound is heard through all outputs of the unit. If you have any trouble with your Digitone II and suspect it may be due to a hardware problem, perform this self-test. The [UP] and [DOWN] keys can be used to scroll through the test log. A fully functional device should not report any errors. If it does report an error, please contact Elektron support or the retailer where you bought your Digitone II from. 14.2 EMPTY RESET To perform this operation, press the [TRIG 2] key. All patterns and presets will be erased. The data on the +Drive remains intact. 14.3 FACTORY RESET When performing a factory reset on the Digitone II, it will overwrite and re-initialize the active RAM project (including all pattern and global data). The +Drive project slot 1 will be overwritten and re-initialized with fac tory preset patterns, presets and settings. Preset bank A and B will be overwritten with the factory presets. If you wish to keep the active project, remember to save it to a +Drive project slot higher than 1 before you perform a factory reset. To perform a factory reset, press the [TRIG 3] key. 14.4 OS UPGRADE Use this menu option if you for some reason cant upgrade the Digitone II OS using the standard procedure in the SYSTEM menu. To send the OS file, use our free Elektron Transfer software. The Elektron Transfer can be downloaded from the Elektron website. 1. Download the Digitone II OS file from the Elektron website. 2. Connect the Digitone II’s MIDI IN port to the MIDI OUT port of the computer’s MIDI interface. 3. Hold down the [FUNC] key while powering on Digitone II. This takes you to the STARTUP menu. 4. Press the [TRIG 4] key to enter OS UPGRADE mode. 5. Open the Transfer application on your computer. On the Transfer CONNECTION page, click “go to the SYSEX TRANSFER page”. 6. On the SYSEX TRANSFER page, click “OS Upgrade via device startup menu”, and then follow the on- screen instructions. When the update is done, the Digitone II will reboot. USB MIDI transfer is not possible when upgrading the OS from the STARTUP menu. 14.5 EXIT Press the [TRIG 5] key to exit the STARTUP menu.
章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。