8.6 MUTE MODE
8. TONVERK CONTROLS > 8.6 MUTE MODE · PDF 第 31–32 · OS 1.3.3
# 8.6 MUTE MODE 8. TONVERK CONTROLS GUIDE (with CHORD set to OFF) decides which notes will play when you press the [KEYBOARD] keys. OFF In this mode, all the [KEYBOARD] keys play all notes chromatically and ignore the selected scale. LIGHT In this mode, all the [KEYBOARD] keys play all notes chromatically and ignore the selected scale, but the [KEYBOARD] keys within the selected SCALE will light up. SNAP In this mode, all the [KEYBOARD] keys play notes within the selected scale. The [KEY BOARD] keys that are not within the scale will play the note that is closest within the scale. FILTER In this mode, only the [KEYBOARD] keys within the selected scale will play notes. GUIDE (with CHORD set to ON) decides which notes will play when you press the [KEYBOARD] keys. OFF In this mode, the [KEYBOARD] key you play will always sound, whether it is within the select ed scale or not. However, the notes added by the chord mode, always play within the chosen scale and are based on the ROOT, SCALE, and SHAPE settings. If the key played is not within the scale, the added notes will derive from the nearest lower note within the scale. LIGHT In this mode, the [KEYBOARD] key you play will always sound, whether it is within the selected scale or not. However, the notes added by the chord mode, always play within the chosen scale and are based on the ROOT, SCALE, and SHAPE settings. If the key played is not within the scale, the added notes will derive from the nearest lower note within the scale. The [KEYBOARD] keys within the chosen SCALE will light up. SNAP In this mode all the [KEYBOARD] keys played will play notes within the selected scale. If you play a key that is not within the scale, it will play the note that is closest within the scale. The notes added based on the ROOT, SCALE, and SHAPE settings will also play within the selected scale. FILTER In this mode, only the [KEYBOARD] keys within the selected scale will play notes and trig ger chords within the scale. CHORD switches CHORD MODE on/off. The keyboard now plays multiple notes with each key press. The notes added are based on the ROOT, SCALE, and SHAPE settings. • You can also press [FUNC] + [CHORD] to toggle the CHORD MODE on/off. • If CHORD mode is set to ON, the [CHORD] key will light up cyan. ROOT sets the root note for the chosen scale. SCALE sets the scale. This setting governs which notes are playable on Tonverk’s [KEYBOARD] keys to allow only notes in the set scale (with FILTER set to LOCK) and which notes will sound when CHORD is set to ON. For a list of all selectable keyboard scales, please see ”APPENDIX E: KEY BOARD SCALES” on page 119. TYPE/SHAPE With SCALE set to CHROMATIC, you have here a selection of different types of chords (for example, MAJ, MIN, MIN7, MAJ7, DIM) to choose from. With SCALE set to anything but CHRO MATIC, diatonic chords in the scale are created, and SHAPE sets which notes in the chord are used. For example, with ROOT set to C and SCALE to ION (white key notes only), and SHAPE set to 1-3-5: Playing a C note, this will create the notes C, E, G (C major) Playing a D note, this will create the notes D, F, A (D minor) Playing a C note on 1-3-5-7 will create the notes C, E, G, B (C major 7th), etc 8.6 MUTE MODE You can use MUTE mode to mute sequencer tracks 1–16. In MUTE mode, you can mute all tracks. However, if you want to mute the subtracks on a track that uses the Subtracks SRC machine, this track needs to be active when you enter MUTE mode. Muting the parent track using the [TRIG] key mutes all subtracks. 8. TONVERK CONTROLS Press [MUTE] to enter MUTE mode and then press [TRIG]/[SUBTRACKS] to mute the corresponding track. Press again to unmute. The light of the [TRIG]/[SUBTRACKS] keys indicates the mute status. Unlit keys are muted tracks. Lit keys are active tracks. Press [MUTE] to exit MUTE mode. There are two different versions of MUTE mode. Press [MUTE] + [UP/DOWN] to switch between modes. • GLOBAL MUTE MODE In GLOBAL MUTE mode, the muted tracks are muted in all patterns. In this mode, the [TRIG]/[SUBTRACKS] keys are lit green. If you are not in MUTE mode, but have muted one or several tracks/subtracks in GLOBAL MUTE mode, the [MUTE] key will be lit dimly green. In GLOBAL MUTE mode, on a track that uses a Subtracks machine, if you mute a subtrack, the track’s [TRIG] key will be lit dimly green. Press [MUTE] + [UP] to enter GLOBAL MUTE mode. • PATTERN MUTE MODE In PATTERN MUTE mode, the muted tracks are muted only in the active pattern. In this mode, the [TRIG]/[SUBTRACKS] keys are lit magenta. If you are not in MUTE mode, but have muted one or several tracks/subtracks in PATTERN MUTE mode, the [MUTE] key will be lit dimly magenta. In PATTERN MUTE mode, on a track that uses a Subtracks machine, if you mute a subtrack, the track’s [TRIG] key will be lit dimly magenta. Press [MUTE] + [DOWN] to enter PATTERN MUTE mode. If you are not in MUTE mode, but have muted one or several tracks/subtracks, the [MUTE] key will be lit dimly green/magenta. In MUTE mode, on a track that uses a Subtracks machine, if you mute a subtrack, the track’s [TRIG] key will be lit dimly green/magenta. You can also prepare tracks for muting/unmuting before the mute action takes effect. While in any MUTE mode, press and hold [FUNC] and then press the [TRIG] keys corresponding with the tracks you want to mute/unmute. The selected track will then be muted/unmuted when you release [FUNC]. The GLOBAL MUTE mode settings are saved together with the project. The PATTERN MUTE mode settings are saved together with the pattern. You can also quick mute tracks by pressing [MUTE] + [TRIG]/[SUBTRACKS]. 8.7 TRIG MODES The various TRIG modes affect the functionality of the [TRIG 1–16] keys. Press [FUNC] + [DOWN] to ac cess the TRIG MODE menu and then use [UP]/[DOWN] to select which TRIG mode should be active. The selected TRIG mode is active for all the tracks. All actions performed using the trig modes can be recorded in LIVE RECORDING mode. TRACKS This is the default TRIG mode. In this mode, the [TRIG 1–16] keys trigger/select the corresponding tracks. VELOCITY In this TRIG mode, the [TRIG 1–16] keys triggers the active track with different amounts of velocity. Trig 1 = Velocity 8 Trig 9 = Velocity 72 Trig 2 = Velocity 16 Trig 10 = Velocity 80 Trig 3 = Velocity 24 Trig 11 = Velocity 88 Trig 4 = Velocity 32 Trig 12 = Velocity 96 Trig 5 = Velocity 40 Trig 13 = Velocity 104 Trig 6 = Velocity 48 Trig 14 = Velocity 112 Trig 7 = Velocity 56 Trig 15 = Velocity 120 Trig 8 = Velocity 64 Trig 16 = Velocity 127
章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。