8.7 TRIG MODES
8. TONVERK CONTROLS > 8.7 TRIG MODES · PDF 第 32–33 · OS 1.3.3
# 8.7 TRIG MODES 8. TONVERK CONTROLS Press [MUTE] to enter MUTE mode and then press [TRIG]/[SUBTRACKS] to mute the corresponding track. Press again to unmute. The light of the [TRIG]/[SUBTRACKS] keys indicates the mute status. Unlit keys are muted tracks. Lit keys are active tracks. Press [MUTE] to exit MUTE mode. There are two different versions of MUTE mode. Press [MUTE] + [UP/DOWN] to switch between modes. • GLOBAL MUTE MODE In GLOBAL MUTE mode, the muted tracks are muted in all patterns. In this mode, the [TRIG]/[SUBTRACKS] keys are lit green. If you are not in MUTE mode, but have muted one or several tracks/subtracks in GLOBAL MUTE mode, the [MUTE] key will be lit dimly green. In GLOBAL MUTE mode, on a track that uses a Subtracks machine, if you mute a subtrack, the track’s [TRIG] key will be lit dimly green. Press [MUTE] + [UP] to enter GLOBAL MUTE mode. • PATTERN MUTE MODE In PATTERN MUTE mode, the muted tracks are muted only in the active pattern. In this mode, the [TRIG]/[SUBTRACKS] keys are lit magenta. If you are not in MUTE mode, but have muted one or several tracks/subtracks in PATTERN MUTE mode, the [MUTE] key will be lit dimly magenta. In PATTERN MUTE mode, on a track that uses a Subtracks machine, if you mute a subtrack, the track’s [TRIG] key will be lit dimly magenta. Press [MUTE] + [DOWN] to enter PATTERN MUTE mode. If you are not in MUTE mode, but have muted one or several tracks/subtracks, the [MUTE] key will be lit dimly green/magenta. In MUTE mode, on a track that uses a Subtracks machine, if you mute a subtrack, the track’s [TRIG] key will be lit dimly green/magenta. You can also prepare tracks for muting/unmuting before the mute action takes effect. While in any MUTE mode, press and hold [FUNC] and then press the [TRIG] keys corresponding with the tracks you want to mute/unmute. The selected track will then be muted/unmuted when you release [FUNC]. The GLOBAL MUTE mode settings are saved together with the project. The PATTERN MUTE mode settings are saved together with the pattern. You can also quick mute tracks by pressing [MUTE] + [TRIG]/[SUBTRACKS]. 8.7 TRIG MODES The various TRIG modes affect the functionality of the [TRIG 1–16] keys. Press [FUNC] + [DOWN] to ac cess the TRIG MODE menu and then use [UP]/[DOWN] to select which TRIG mode should be active. The selected TRIG mode is active for all the tracks. All actions performed using the trig modes can be recorded in LIVE RECORDING mode. TRACKS This is the default TRIG mode. In this mode, the [TRIG 1–16] keys trigger/select the corresponding tracks. VELOCITY In this TRIG mode, the [TRIG 1–16] keys triggers the active track with different amounts of velocity. Trig 1 = Velocity 8 Trig 9 = Velocity 72 Trig 2 = Velocity 16 Trig 10 = Velocity 80 Trig 3 = Velocity 24 Trig 11 = Velocity 88 Trig 4 = Velocity 32 Trig 12 = Velocity 96 Trig 5 = Velocity 40 Trig 13 = Velocity 104 Trig 6 = Velocity 48 Trig 14 = Velocity 112 Trig 7 = Velocity 56 Trig 15 = Velocity 120 Trig 8 = Velocity 64 Trig 16 = Velocity 127 9. PATTERNS, PRESETS, AND INSTRUMENTS 9. PATTERNS, PRESETS, AND INSTRUMENTS The patterns are the primary data container for Tonverk. Sixteen patterns are available for each of the eight banks, resulting in 128 patterns for each project. A pattern contains up to 16 presets (one for each track), as well as sequencer data such as trigs and parameter locks. It also includes the default settings on the TRIG page, as well as BPM, length, swing, and time signature settings. A preset that has been imported from the SD card to a pattern becomes part of the active pattern. Any changes made to a preset will therefore not affect the stored preset. It will only affect the preset in the ac tive pattern. You can save a preset from the active pattern to the SD card. For more information, please see “9.1 THE FILE MENU” on page 33. A preset imported to a pattern becomes an independent copy of the preset on the SD card. It is not linked to the original preset on the SD card, and instead becomes a part of the pattern. A pattern contains: • All the presets used on the pattern’s tracks. • Routing settings. • Sequencer data, such as trigs and parameter locks, for the 16 tracks. • The settings on the TRIG page, BPM, length, swing, and time signature settings. A preset contains: A preset is a sample (for the Single Player machine), eight separate samples collected in an Instrument (for the Subtracks machine) or a multi-sample Instrument (for the Multi Player machine) plus all the track set tings in the SRC, FLTR, AMP, FX (only the settings for the two insert effects), and MOD parameter pages. If you have selected the MIDI machine as a SRC machine, the preset will not contain any samples. For more information, please see “A.2 SRC MACHINES” on page 84. An instrument is: An instrument contains the samples and the sample mapping used to create a multi-sample that the Sub tracks and Multi Player machines play. The instrument also includes information such as Sample level, Loop length, Tune, and Play Mode. 9.1 THE FILE MENU Press [FUNC] + [PRESET] to open the FILE menu. Here you manage projects, songs, patterns, and pre sets. Use the [ARROW] keys and LEVEL/DATA to navigate the menu. Press [YES] to select a menu item. Press [NO] to exit the menu. 9.1.1 PROJECT This is where you can load, create, and save projects. LOAD Use [UP]/[DOWN] to select the project you want to load, and then press [YES]. If you load a new project, it will replace the active project. Be sure to save your active project before you load another project. PROJECT ACTIONS Use [UP]/[DOWN] to select the project you want to interact with. Then press [RIGHT] to bring up a list of commands. Press [NO] or [LEFT] to exit the list. • LOAD Loads the selected project. This option is only available if the selected slot is not the same as the current project’s slot.
章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。