9. PATTERNS, PRESETS, AND INSTRUMENTS

9. PATTERNS, PRESETS, AND INSTRUMENTS · PDF 第 33 · OS 1.3.3

# 9. PATTERNS, PRESETS, AND INSTRUMENTS

9. PATTERNS, PRESETS, AND INSTRUMENTS
9. PATTERNS, PRESETS, AND INSTRUMENTS
The patterns are the primary data container for Tonverk. Sixteen patterns are available for each of the eight
banks, resulting in 128 patterns for each project. A pattern contains up to 16 presets (one for each track), as
well as sequencer data such as trigs and parameter locks. It also includes the default settings on the TRIG
page, as well as BPM, length, swing, and time signature settings.
A preset that has been imported from the SD card to a pattern becomes part of the active pattern. Any
changes made to a preset will therefore not affect the stored preset. It will only affect the preset in the ac
tive pattern. You can save a preset from the active pattern to the SD card. For more information, please see
“9.1 THE FILE MENU” on page 33.
A preset imported to a pattern becomes an independent copy of the preset on the SD card. It
is not linked to the original preset on the SD card, and instead becomes a part of the pattern.
A pattern contains:
• All the presets used on the pattern’s tracks.
• Routing settings.
• Sequencer data, such as trigs and parameter locks, for the 16 tracks.
• The settings on the TRIG page, BPM, length, swing, and time signature settings.

A preset contains:
A preset is a sample (for the Single Player machine), eight separate samples collected in an Instrument (for
the Subtracks machine) or a multi-sample Instrument (for the Multi Player machine) plus all the track set
tings in the SRC, FLTR, AMP, FX (only the settings for the two insert effects), and MOD parameter pages. If
you have selected the MIDI machine as a SRC machine, the preset will not contain any samples. For more
information, please see “A.2 SRC MACHINES” on page 84.
An instrument is:
An instrument contains the samples and the sample mapping used to create a multi-sample that the Sub
tracks and Multi Player machines play. The instrument also includes information such as Sample level, Loop
length, Tune, and Play Mode.
9.1 THE FILE MENU
Press [FUNC] + [PRESET] to open the FILE menu. Here you manage projects, songs, patterns, and pre
sets. Use the [ARROW] keys and LEVEL/DATA to navigate the menu. Press [YES] to select a menu item.
Press [NO] to exit the menu.
9.1.1 PROJECT
This is where you can load, create, and save projects.
LOAD
Use [UP]/[DOWN] to select the project you want to load, and then press [YES].
If you load a new project, it will replace the active project. Be sure to save your active
project before you load another project.
PROJECT ACTIONS
Use [UP]/[DOWN] to select the project you want to interact with. Then press [RIGHT] to bring up a
list of commands. Press [NO] or [LEFT] to exit the list.
• LOAD Loads the selected project. This option is only available if the selected slot is not the
same as the current project’s slot.

章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。