← 返回搜索

10.5 MICRO TIMING

10. THE SEQUENCER > 10.5 MICRO TIMING · PDF 第 42 · OS 1.3.3

# 10.5 MICRO TIMING

10. THE SEQUENCER
made using the DATA ENTRY knobs are recorded as parameter locks and add lock triggers where
needed.
3.	 Press [PLAY] to exit LIVE RECORDING mode while keeping the sequencer playing. If LIVE RECORD­
ING mode is active and [RECORD] is pressed, GRID RECORDING mode will be activated.
4.	 Press [STOP] to stop both recording and playback of the sequencer.
You can use an external MIDI controller such as a keyboard to input NOTE, TRIG
VELOCITY, and TRIG LENGTH data in LIVE RECORDING mode. Just play the notes on the
external keyboard, and the sequencer will record them. The first note sets the TRIG VELOCI­
TY value for all notes on the trig. The last note that is released sets the TRIG LENGTH for all
notes on the trig.
10.5 MICRO TIMING
Here you can add micro timing to a note trig, moving it ahead or behind the beat. Micro timing can be cus­
tomized on any of the sequencer steps on both audio and MIDI tracks. In GRID RECORDING mode, press
and hold one or several [TRIG] keys and then press [LEFT]/[RIGHT] to access the pop-up MICRO TIM­
ING menu that shows the time offset for the chosen sequencer step(s) on the active track. Press [LEFT]/
[RIGHT] to adjust the time offset in large increments. Press [UP]/[DOWN] to adjust the time offset in small
increments. To exit the MICRO TIMING menu, release the [TRIG] key(s). The micro timing settings are
stored in the active pattern.
10.6 TRANSFORM MENU
Here you can affect certain aspects of the trigs already placed on a track. The Transform actions affect all
the trigs on the selected track. Press [FUNC] + [-] to access the TRANSFORM menu.
VELOCITY UNLOCK removes all parameter locks for the VEL parameter.
VELOCITY RANDOMIZE randomizes the velocity of the trigs by placing parameter locks on the VEL
parameter.
VELOCITY RAMP UP sets the velocity of the trigs from low to high by placing parameter locks on the
VEL parameter.
VELOCITY RAMP DOWN sets the velocity of the trigs from high to low by placing parameter locks on the
VEL parameter.
PLACEMENT RANDOMIZE randomizes the placement of the trigs on the track.
PLACEMENT REVERSE reverses the placement of the trigs on the track.
10.7 RETRIGS
Retrigs can be customized on any of the sequencer steps on the audio tracks. In GRID RECORDING mode,
press [TRIG PARAMETERS] to access the retrig parameters. Hold one or several [TRIG] keys and then set
the desired retrig options for the trig(s).
For more information about the parameters on this page, please see “12.2 TRIG PAGE 1” on page 54.

章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。