11.4 AMP
11. THE TRACK SETUP MENU > 11.4 AMP · PDF 第 52–53 · OS 1.3.3
# 11.4 AMP 11. THE TRACK SETUP MENU 11.1.11 MODULATION WHEEL Opens a menu where you can assign up to four parameters to the MIDI mod wheel command (CC #1). Press [YES] to open the menu. Selecting parameters and setting modulation depth work in the same way as for PITCH BEND. 11.1.12 BREATH CONTROLLER Opens a menu where you can assign up to four parameters to the MIDI breath controller command (CC #2). Press [YES] to open the menu. Selecting parameters and setting modulation depth work in the same way as for PITCH BEND. 11.2 SRC Here you can select the SRC machine. Use [UP]/[DOWN] to select machine, and then press [YES] to assign the selected machine to the track. From this page, you can also access and choose the two insert FX machines for the track. Use [LEFT]/[RIGHT] to navigate to the desired machine category. For more information, please see “A.2 SRC MACHINES” on page 84. Press [FUNC] + [SRC] to directly access this page. There are no SRC machines available for SEND FX and MIX tracks. 11.3 FLTR Here, you can select the order in which the filters and overdrive are routed in the signal path. Use [LEFT]/ [RIGHT] to select the order you want. For more information, please see “4. TONVERK SOUND ARCHITEC TURE” on page 17. Press [FUNC] + [FLTR] to directly access this page. 11.3.1 ROUTING Let’s you select the order in which the Overdrive, Base-width filter, and Multimode filter should be arranged in the sound architecture. This setting is only available for audio tracks. For more information, please see “4.1 AUDIO VOICES” on page 17. 11.4 AMP On this page, you find several settings related to the amplifier. These settings are only available for audio tracks. Press [FUNC] + [AMP] to access this page. 11. THE TRACK SETUP MENU 11.4.1 VELOCITY TO VOL Selects how MIDI velocity affects volume when playing the preset from a MIDI keyboard. OFF means that velocity does not affect the volume of the sound. LOG applies a logarithmic velocity curve. The volume difference is greater between softer keyboard presses than between harder ones. LIN applies a linear velocity curve. The volume difference between keyboard presses corresponds linearly to the force applied. EXP applies an exponential velocity curve. The volume difference is greater between harder keyboard presses than between softer. 11.4.2 ENVELOPE MODE Envelope type sets if the amplitude envelope should be an AHD or ADSR envelope. 11.4.3 ENVELOPE RESET Envelope reset sets the amplitude envelope behavior: ON resets the envelope for each consecutive trig. OFF does not reset the envelope for each consecutive trig. 11.5 FX Here, you can select the two insert FX machines, set the level of the audio routed to the track’s effect(s), and set the post FX pan. This parameter group has three subpage. Use the [FX] key to cycle through the two subpages for the effects and the level setup page. Use [UP]/[DOWN] to select the machine, and then press [YES] to assign the selected machine to the track. Use [LEFT]/[RIGHT] to set the input levels and Post FX pan amount on FX page 3. For more information, please see “A.3 FX MACHINES” on page 98. Press [FUNC] + [FX] to directly access this page. 11.5.1 FX 1 IN LEV Sets the gain of the audio from the SRC machine that is sent to insert effect 1. 11.5.2 FX 2 IN LEV Sets the gain of the audio from the SRC machine that is sent to insert effect 2. This parameter is not available for the Mix track. 11.5.3 POST FX PAN Pans the track’s sound after the effects stage, affecting the entire output of the track. This parameter is not available for the Mix track. 11.6 MOD This page provides an overview of which PARAMETER pages parameters the different modulation sources can affect. The settings and routings are performed on the track’s MODULATION pages. Press [FUNC] + [MOD] to directly access this page.
章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。