11.5 FX
11. THE TRACK SETUP MENU > 11.5 FX · PDF 第 53 · OS 1.3.3
# 11.5 FX 11. THE TRACK SETUP MENU 11.4.1 VELOCITY TO VOL Selects how MIDI velocity affects volume when playing the preset from a MIDI keyboard. OFF means that velocity does not affect the volume of the sound. LOG applies a logarithmic velocity curve. The volume difference is greater between softer keyboard presses than between harder ones. LIN applies a linear velocity curve. The volume difference between keyboard presses corresponds linearly to the force applied. EXP applies an exponential velocity curve. The volume difference is greater between harder keyboard presses than between softer. 11.4.2 ENVELOPE MODE Envelope type sets if the amplitude envelope should be an AHD or ADSR envelope. 11.4.3 ENVELOPE RESET Envelope reset sets the amplitude envelope behavior: ON resets the envelope for each consecutive trig. OFF does not reset the envelope for each consecutive trig. 11.5 FX Here, you can select the two insert FX machines, set the level of the audio routed to the track’s effect(s), and set the post FX pan. This parameter group has three subpage. Use the [FX] key to cycle through the two subpages for the effects and the level setup page. Use [UP]/[DOWN] to select the machine, and then press [YES] to assign the selected machine to the track. Use [LEFT]/[RIGHT] to set the input levels and Post FX pan amount on FX page 3. For more information, please see “A.3 FX MACHINES” on page 98. Press [FUNC] + [FX] to directly access this page. 11.5.1 FX 1 IN LEV Sets the gain of the audio from the SRC machine that is sent to insert effect 1. 11.5.2 FX 2 IN LEV Sets the gain of the audio from the SRC machine that is sent to insert effect 2. This parameter is not available for the Mix track. 11.5.3 POST FX PAN Pans the track’s sound after the effects stage, affecting the entire output of the track. This parameter is not available for the Mix track. 11.6 MOD This page provides an overview of which PARAMETER pages parameters the different modulation sources can affect. The settings and routings are performed on the track’s MODULATION pages. Press [FUNC] + [MOD] to directly access this page.
章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。