13.8 MOD PAGE 2 (LFO 2)
13. BUS TRACK PARAMETERS > 13.8 MOD PAGE 2 (LFO 2) · PDF 第 65–66 · OS 1.3.3
# 13.8 MOD PAGE 2 (LFO 2) 13. BUS TRACK PARAMETERS 13.7 MOD PAGE 1 (LFO 1) The Low-Frequency Oscillator 1 is used to modulate the track’s parameters. Customize the LFO behavior, orientation, speed, and depth on this page. This page controls the behavior of LFO 1. The parameters on this page are the same as on the Audio track’s MOD PAGE 1. For more information, please see “12.12 MOD PAGE 1 (VOICE LFO 1)” on page 59. 13.8 MOD PAGE 2 (LFO 2) The Low-Frequency Oscillator 2 is used to modulate the track’s parameters. Customize the LFO behavior, orientation, speed, and depth on this page. This page controls the behavior of LFO 2. The parameters on this page are the same as on the Audio track’s MOD PAGE 1. For more information, please see “12.12 MOD PAGE 1 (VOICE LFO 1)” on page 59. 14. SEND FX TRACK PARAMETERS 14. SEND FX TRACK PARAMETERS The parameters that are available on the Send FX tracks are explained in this chapter. For more informa tion about Send FX tracks, please see ”5.3.4 SEND FX TRACKS (TRACK 13–15)” on page 20. On the FX parameter pages, you have parameters for selecting and editing the Send FX track’s FX machines. On the MOD pages, you have two LFOs dedicated as modulation sources for the track’s parameters. 14.1 EDITING THE SEND FX TRACK PARAMETERS Press [TRK] + [TRIG 13–15] to select the Send FX track you want to edit. There are three PARAMETER pages for the SEND FX tracks. Press [TRIG], [FX], and [MOD] to access the tracks PARAMETER page groups. Use the [UP]/[DOWN] keys to access the parameter group’s pages. You can also press a [PARAM ETER PAGE] key repeatedly to cycle through that group’s parameter pages. Press and hold a [PARAME TER PAGE] key to see the values for all parameters on that page. The track parameters can be locked to other settings at any step of the pattern by first pressing and hold ing the [TRIG] key, then adjusting the parameter settings with the DATA ENTRY knobs. For more informa tion, please see “10.10.1 PARAMETER LOCKS” on page 44. If you press [TRIG 13–15] to select a Send FX track without first pressing and holding [TRK], you can still use the [KEYBOARD] to play the previously selected audio track. 14.2 TRIG PAGE Here you set the options for notes that are trigged. This is also where you select trig conditions. Press the [TRIG PARAMETERS] key to access the menu. Change settings using the DATA ENTRY knobs. These general settings affect note trigs placed on the sequencer. NOTE Trig Note sets the pitch of the note when trigged. When in LIVE RECORDING mode and using the [KEY BOARD] to enter notes, the pitch of the [TRIG] keys played will override this setting. The NOTE parame ter is not available for tracks that have the Subtracks SRC machine assigned. VEL Trig Velocity sets the velocity of the sequencer’s note trigs. LEN Trig Length sets the length of the note trig. In LIVE RECORDING mode, the duration of pressing the [TRIG] keys overrides this general setting. PROB Trig Probability sets the probability that the trigs on the track play or not. The probability outcome is re-evaluated every time a trig is set to play. The default setting is 100%, meaning that all the trigs on the track play every time. This parameter can be parameter locked, which lets you give separate trigs their own probability. RTRG Retrig enables multiple trig repeats on placed trigs. Use DATA ENTRY knob A to turn retrig on or off. For information on setting retrig locks on specific trigs in the sequencer, please see “10.7 RETRIGS” on page 42. RTIM Repeat Time sets the retrig rate. 1/16 is the nominal retrig rate, one trig per step. 1/32 corresponds to two trigs per step and so on. To do triplets, for example, set the retrig rate to 1/12 (or 1/24).
章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。