16.4 TRANSFERRING SAMPLES FROM A COMPUTER TO TONVERK
16. SAMPLING > 16.4 TRANSFERRING SAMPLES FROM A COMPUTER TO TONVERK · PDF 第 73–74 · OS 1.3.3
# 16.4 TRANSFERRING SAMPLES FROM A COMPUTER TO TONVERK 16. SAMPLING 6. Press [YES] to play a test note. The Autosampler will measure the latency and correct for it. It will also measure the release time of the sound you want to sample and set a release time that ac counts for the full release of the sound. Press [NO] if you want to cancel the timing test. 7. Use LTNCY to manually adjust the latency if you want to adjust the latency compensation set by the test note in step 6. 8. Use REL to manually set a release time if you want to adjust the release time set by the test note in step 6. 9. Press [RIGHT] to navigate to the next setting page and then set the following parameters: START, END sets the note range you want to sample. SAMPLE EVERY sets the interval between the actual notes to be sampled within the selected note range. For example, if the note range is one octave and STEP is set to 1, every semitone within the range is sampled. With STEP set to 3, every third semitone within the range will be sampled. The first note sampled is always the lowest note selected by the START parameter. VEL LAYERS sets how many separate velocities each note are sampled with. 10. Press [RIGHT] and then use LENGTH to set the time for which each sampled note should be held. 11. Press [YES] to name for the sample and initiate the sampling process.. You can edit the suggested name for the multi-sample. For more information, please see “6.7 THE NAMING SCREEN” on page 23. Press [YES] again to start sampling. Press [NO] to exit the Auto Sampler. When the auto-sampling process is complete, the instrument/sample is saved to the folder USER/ MULTI-SAMPLED INSTRUMENTS on the SD card. The auto sampling process generates a number of files: one instrument (.elmulti) for use in the Multi Player machine and one single sample (.wav) containing all the sampled notes, one after another, for use in the Single player machine. When sampling with multiple velocity layers, set the VELOCITY TO VOL parameter to LOG or LIN for best results. For more information, please see “11.4.1 VELOCITY TO VOL” on page 53. 16.4 TRANSFERRING SAMPLES FROM A COMPUTER TO TONVERK Tonverk can load and play WAV and AIFF audio files of any bit depth and sample rate. It will play them back at a maximum of 32-bit float, 48 kHz. Samples are stored on the SD card, and the size and number of those samples are limited only by the available free space on the SD card 1. Connect Tonverk to a computer using a USB cable attached to one of Tonverk’s USB ports. 2. In Tonverk, navigate to SETTINGS > USB DISK MODE, and then press [YES]. 3. In the popup window, press [YES], but note that device playback will stop. 4. Tonverk’s SD card should now show up in your computer as a USB device. Click the Tonverk USB device on your computer to access the contents of the SD card. 5. On the SD card, navigate to the User/Samples folder and copy your sample files there. You can also create subfolders within the Samples folder and copy the files there. 6. Once all files are copied, safely eject the Tonverk USB device from the computer. Please refer to your computer’s documentation on how to perform this procedure. 7. On your device. Press [NO] to exit USB disk mode. • We recommended that you save and add content only to the USER folder on the SD card. This folder also contains the default destinations for saving projects, presets, samples, and instruments. • If you delete or move samples (or a folder containing samples) on the SD card, it will affect all projects that use the deleted or moved samples, and the samples will be missing from these projects. • The write-protect switch on the SD card must be set to OFF if you want to write to the card. You can also use a smartphone or tablet to upload samples to Tonverk’s SD card. 17. SETTINGS MENU 17. SETTINGS MENU The SETTINGS menu offers settings that affect Tonverk and can also be used to manage Projects. Press [SETTINGS] to access the SETTINGS menu. Scroll the list by using [UP]/[DOWN] or the LEVEL/ DATA knob. Open a highlighted menu by pressing [YES]. 17.1 USB DISK MODE This option allows you to access Tonverk’s SD card from a computer, enabling the transfer of files between the device and the computer. This is useful for transferring samples and OS updates. 17.1.1 USING USB DISK MODE 1. Connect Tonverk to a computer/phone/tablet using a USB cable attached to one of Tonverk’s USB ports. 2. Select USB DISK MODE and then press [YES]. 3. In the pop-up window, press [YES], but note that device playback will stop. 4. Tonverk should now show up on your computer as a USB device. Click the Tonverk USB device on your computer to access the contents of the SD card. 5. To exit the USB disk mode, you must first safely eject the Tonverk USB device. Please refer to your computer’s documentation on how to perform this procedure. 6. On your device. Press [NO] to exit USB disk mode. If you delete or move samples (or a folder containing samples) on the SD card, it will affect all projects that use the deleted or moved samples, and the samples will be missing from these projects. 17.2 MIDI CONFIG In this menu, various sub-menus dealing with the MIDI functionality of Tonverk are found. 17.2.1 SYNC Controls how Tonverk receives and sends MIDI clock and transport commands. Change settings by using the [LEFT]/[RIGHT] arrow keys or the [YES] key.
章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。