Knobwerk
MAIN_VOLUMEMain VolumeLEVEL_DATA — Preset PoolLevel/DataSCREEN
T1 AUDIO2/2
TRIG2
ARTRG
BVFAD
CLEN
DRATE
E—
F—
GPTIM
HPORT
ENC_AAENC_BBENC_CCENC_DDENC_EEENC_FFENC_GGENC_HHTRIG_PARAMS — QuantizeTRIGQuantizeSRC — MachineSRCMachineFLTR — SetupFLTRSetupAMP — SequencerAMPSequencerFX — Send FXFXSend FXMOD — MixerMODMixerPRESET_KIT — Perform▤PerformSETTINGS — Save Proj⚙Save ProjSAMPLING — Samples≈SamplesTEMPO — Tap TempoTap TempoRECORD — Copy○CopyPLAY — Clear▷ClearSTOP — Paste□PasteFUNCFUNCKEYBOARD — KB SetupKB SetupTRK — Mute ModeTRKMute ModePTN — BankPTNBankSONG — Song EditSONGSong EditYES — SaveYESSaveNO — ReloadNOReloadUP — Trig Mode^Trig ModeLEFT — uTime-<uTime-DOWN — Trig ModevTrig ModeRIGHT — uTime+>uTime+PAGE — Fill/SetupPAGEFill/SetupTRIG_11TRIG_22TRIG_33TRIG_44TRIG_55TRIG_66TRIG_77TRIG_88TRIG_99TRIG_1010TRIG_1111TRIG_1212TRIG_1313TRIG_1414TRIG_1515TRIG_1616
T1 AUDIO2/2
TRIG2
ARTRG
BVFAD
CLEN
DRATE
E—
F—
GPTIM
HPORT

This panel is live — click keys to operate it. [FUNC] toggles the second layer, [TRK] then a trig key switches track, parameter-page keys cycle their pages, [UP]/[DOWN] browse, encoders inspect parameters.

RATERateTRIG2 · knob D

Sets the retrig rate. 1/16 is the nominal retrig rate, one trig per step; 1/32 corresponds to two trigs per step, and so on. To trig triplets, set the retrig rate to 1/12 (or 1/24).

1/1 / 1/2 / 1/3 / 1/4 / 1/5 / 1/6 / 1/8 / 1/10 / 1/12 / 1/16 / 1/20 / 1/24 / 1/32 / 1/40 / 1/48 / 1/64 / 1/80§11.3
Getting StartedIntro, setup, and the quick start chapterProcedures82 step-by-step operations, played on the panelParameters260 parameters across all track types and machines
Digitakt II Interactive Manual · Knobwerk