3.1 FRONT PANEL
3. PANEL LAYOUT AND CONNECTORS > 3.1 FRONT PANEL · PDF p. 12–14 · OS 1.10D
# 3.1 FRONT PANEL 3. PANEL LAYOUT AND CONNECTORS 3. PANEL LAYOUT AND CONNECTORS 3.1 FRONT PANEL AMP FX MOD FLTR SYN TRIG FUNC TRK PTN SONG YES NO PAGE 1. MAIN VOLUME sets the volume for the main outputs and the headphones output. 2. [PRESET/KIT] opens PRESET/KIT menu where you manage presets and kits. The secondary function accesses the PERFORM KIT mode. 3. [SETTINGS] opens the SETTINGS menu that contains the management of projects, MIDI configuration, and the System settings. The secondary function saves the current project. 4. [VOICE SETUP] opens the VOICE menu where you handle the track’s voice allocation. The secondary function toggles unison on/off. 5. [TEMPO] opens the TEMPO menu where you can adjust the global/pattern tempo and also adjust the swing. The secondary function makes it possible to tap the tempo. 6. [NO] key. Used for exiting an active menu, backing one step and negating. The secondary function is a reload from the temporary save of the active pattern. 7. [YES] key. Used for entering sub-menus, selecting and confirming. The secondary function is a tempo rary save of the active pattern. 8. DATA ENTRY knobs A-H. Used for setting parameter values. Press and turn the knobs to change values in larger increments. 9. [PARAMETER] keys access the PARAMETER pages of the active track. The color of the keys indicates if the page is active (red/turquoise) or inactive (off). • [TRIG PARAMETERS] accesses parameters such as NOTE, VELOCITY, and other trig related parameters. The secondary function accesses the PRESET SETUP menu. • [SYN] accesses the SYN pages. Here you can find parameters related to the SYN machines. For MIDI tracks this page has parameters such as CHANNEL, PROGRAM, and AFTERTOUCH. • [FLTR] accesses the FILTER pages. Here are the parameters for the base-width and multimode filters. On MIDI tracks you find the CC value and select settings for track 1–8 here. The secondary function accesses the SETUP menu.. 3. PANEL LAYOUT AND CONNECTORS • [AMP] takes you to the AMP page, where you find parameters for the amplitude envelope and effect sends. On MIDI tracks you find the CC value and select settings for track 1–8 here. The secondary func tion access the parameters for the Euclidean sequencer. • [FX] takes you to the FX pages, where you find parameters for the bit reduction, overdrive, sample rate reduction, and effect sends levels. The secondary page accesses the parameters for the send effects. • [MOD] accesses the LFO parameters for the active track. The secondary function accesses the MIXER pages. 10. The <PATTERN PAGE> LEDs indicate how many pattern pages the active pattern consists of and which pattern page is currently active. The LED flashes on the pattern page currently playing. 11. The [ARROW] keys. Used for navigation and for setting parameter values. In menus, they are called [UP], [DOWN], [LEFT], and [RIGHT]. 12. [PAGE] selects the active pattern page, if the pattern has more than 16 steps. The secondary function accesses the SCALE menu. This key also activates FILL mode (when GRID RECORDING mode is not active). 13. [ARPEGGIATOR] opens the ARPEGGIATOR menu. The secondary function toggles the arpeggiator on/off. 14. [+]/[-] are used for transposing patterns, tracks and trigs. The secondary function transposes the active track. 15. [NOTE EDIT] opens the NOTE EDIT menu where you can view, edit and add notes and change note relat ed settings such as note value, length, velocity and timing. 16. [TRIG] keys are used for entering or removing sequencer trigs, and parameter locks, in combination with the DATA ENTRY knobs. They are also used to select a track, bank, pattern, and song in combina tion with the [TRK], [PTN], and [SONG] keys. The [TRIG] keys are also used as a keyboard in KEY BOARD mode. The secondary function is to Quick Mute tracks. The [TRIG] keys lights indicate trigs on the sequencer by lit red keys, while flashing red or yellow keys indicates parameter locks, in GRID RECORDING and STEP RECORDING mode. When a pattern is play ing, or when LIVE RECORDING is enabled, a light “runs” along the 16 steps of the sequencer across all (up to eight) pages at the set tempo. 17. [SONG] selects song 1–16 in combination with the [TRIG 1–16] keys. The secondary function accesses the Song edit screen. 18. [PTN] selects the bank and pattern in combination with the [LEFT]/[RIGHT] and [TRIG 1–16] keys. The secondary function opens Bank selection. 19. [TRK] key. Press [TRK] + one of the [TRIG] keys to select a track for editing. The secondary function accesses the MUTE mode. 20. [STOP] stops playback. The secondary function is a paste operation. 21. [PLAY] starts the sequencer playback. Pressing [PLAY] a second time pauses playback. The secondary function is a clear operation. 22. [RECORD] key. Activates/deactivates GRID RECORDING mode. Press [RECORD] + [PLAY] and then to activate LIVE RECORDING mode. [RECORD] + [STOP], to activate STEP RECORDING mode. The secondary function is a copy operation. 23. [KEYBOARD] toggles KEYBOARD mode on/off. The secondary function opens the KEYBOARD SETUP menu where you can view and edit settings such as scale, root note, and keyboard fold. 24. [FUNC] key. Press and hold [FUNC], and then press another key to access the secondary function of that key. The turquoise text on the Digitone II front panel shows the keys secondary functions. 25. LEVEL/DATA sets the overall volume level of the active track. It is also used for setting parameters and scrolling through lists. The secondary function opens the PRESET MANAGER. This knob is also used to open the PRESET POOL when adding preset locks. 26. Screen. 3. PANEL LAYOUT AND CONNECTORS 3.2 REAR CONNECTORS 1. POWER Switch for turning the unit on and off. 2. DC In Input for power supply. Use the included PSU-3c power adapter, connected to a power outlet. 3. USB For connecting the unit to a computer. For MIDI-control or Overbridge use. Use the included A to B USB 2.0 connector cable to connect to a computer host. 4. MIDI THRU/SYNC B, Forwards data from MIDI IN. Can also be configured to send DIN sync to legacy instruments. Use a standard MIDI cable to connect another MIDI device in the chain. 5. MIDI OUT/SYNC A, MIDI data output. Can also be configured to send DIN sync to legacy instruments. Use a standard MIDI cable to connect to MIDI In of an external MIDI device. 6. MIDI IN, MIDI data input. Use a standard MIDI cable to connect to MIDI Out of an external MIDI device. 7. INPUT L/R, Audio inputs used for external sources for audio processing. Use either a 1/4” (Tip/Ring/ Sleeve) phone plug (balanced connection) or a 1/4” mono phone plug (unbalanced connection). 8. OUTPUT L/R, Main audio outputs. Use either a 1/4” (Tip/Ring/Sleeve) phone plug (balanced connection) or a 1/4” mono phone plug (unbalanced connection). 9. HEADPHONES, Audio output for stereo headphones. Use 1/4” Tip/Ring/Sleeve phone plug. 3.3 SETTING UP AND STARTING THE DIGITONE II Make sure you place the Digitone II on a stable support, such as a sturdy table, with sufficient space for the cables. Make sure to switch off all devices before you connect the Digitone II to other devices. 1. Plug the supplied DC adapter into a power outlet and connect the small plug to the 12 V DC In on the Digitone II. 2. Connect OUTPUT L/R from the Digitone II to your mixer or amplifier. or use headphones plugged in to the HEADPHONES jack. 3. To control the Digitone II from a computer, connect a USB cable between the computer and the USB connector of the Digitone II. 4. If you want to use MIDI to control the Digitone II, connect the MIDI OUT port of the device you wish to send data from to the MIDI IN port of the Digitone II. The MIDI THRU port duplicates the data arriving at the MIDI IN port so that it can forward data to other MIDI units. If you want to use Digitone II to control other devices, connect the MIDI OUT port of the Digitone II to the MIDI IN port of the of the device you want to control. 5. Connect an audio source to INPUT L/R or via USB if you want to process audio from external sources. 6. Switch on all units. Press the POWER switch located at the back of the Digitone II to switch it on.
チャンクは隣接セクションとページを共有します。見出し前後のテキストは隣のセクションのものです。