9.1 THE +DRIVE LIBRARY AND THE POOL
9. PATTERNS, KITS AND PRESETS > 9.1 THE +DRIVE LIBRARY AND THE POOL · PDF p. 29–30 · OS 1.10D
# 9.1 THE +DRIVE LIBRARY AND THE POOL 9. PATTERNS, KITS AND PRESETS 9. PATTERNS, KITS AND PRESETS The patterns are the primary data container for the Digitone II. Sixteen patterns are available for each of the eight banks, which means that 128 patterns are available for each project. A pattern contains up to 16 pre sets (one for each track), sequencer data like trigs and parameter locks. It also contains the default settings on the TRIG page and BPM, length, swing and time signature settings. A kit is a collection of 16 presets, one for every track together with a number of kit related settings. A preset is either an audio track preset or a MIDI track preset. Audio track presets contain all settings from the SYN, FLTR, AMP, FX, and MOD PARAMETER pages, and MIDI track presets contain all settings from the SYN, FLTR, AMP, and MOD PARAMETER pages. Any preset can be assigned to any of the 16 tracks. A preset or kit that has been imported from the +Drive to a pattern becomes part of the active pattern. Any changes made to a preset/kit will therefore not affect the stored preset/kit. It will only affect the preset/ kit in the active pattern. You can export (and in that way save) a preset/kit from the active pattern to the +Drive. For more information, please see “9.2 PRESET/KIT MENU” on page 30. When a preset or a kit is imported to a pattern, it becomes a copy of the preset/kit on the +Drive and is not linked to the original preset/kit stored on the +Drive. Instead, it fully be comes a part of the pattern. A pattern contains: • A kit. • Sequencer data such as trigs and parameter locks for the 16 tracks. • The settings on the TRIG page, BPM, length, swing and time signature settings. A kit contains: • 16 audio or MIDI track presets. • LEVEL settings for the audio tracks and the pattern. • Compressor and Master distortion settings • Compressor routing and Control all settings • Send FX settings • Track layering settings • Patterns transpose settings A preset contains: • The SYN, FLTR, AMP, FX and MOD PARAMETER pages settings for the audio track. Or, in the case of MIDI presets, the SYN, FLTR, AMP, and MOD PARAMETER pages settings for the MIDI track. 9.1 THE +DRIVE LIBRARY AND THE POOL The +Drive library can hold up to 2048 presets (256 presets in each bank A-H) that are available to all proj ects. The kits are also stored here. Presets can be loaded to a pattern from either the +Drive library or the pool (Project RAM) of the active project. The difference between the two is that the +Drive library has the capacity of 2048 presets, avail able to all projects, while the pool is a part of a projects internal memory and limited to 128 presets. The primary benefit of presets loaded to the pool is the possibility for them to be preset locked. This feature is not available for the presets in the +Drive library. For more information, please see “10.12.2 PRESET LOCKS” on page 50. 9.1.1 ADDING PRESETS TO THE POOL You must first add presets to the pool to be able to perform preset locks. 1. Press [PRESET/KIT] to open the PRESET/KIT menu. 2. Select (PRESET) MANAGE, and then press [YES] to open the PRESET MANAGER. 3. Select the presets you want to add to the pool by highlighting them and pressing [YES]. 4. Press [LEFT] to open the PRESET SORTING menu. 5. Select ADD TO PRESET POOL and then press [YES]. MIDI presets can not be added to the preset pool 9. PATTERNS, KITS AND PRESETS 9.2 PRESET/KIT MENU Press [PRESET/KIT] to open the PRESET/KIT menu. Here you manage presets (both on the +Drive and in the pool) and kits. Use the [ARROW] keys and LEVEL/DATA to navigate the menu. Press [YES] to select a menu item. Press [NO] to exit the menu. 9.2.1 LOAD (PRESET) Use the [ARROW] keys or LEVEL/DATA to select a preset. Press [YES] to load the preset to the active track. Press [TRK] + [TRIG 1–16] to change active track. Press the tack’s [TRIG] key to preview the highlighted preset before you load it. You can also press [FUNC] + [YES] to preview the preset. Press KEYBOARD, and then use the [TRIG] keys to preview the selected preset in the selected scale. Press [LEFT] to access the SORTING menu. Press [YES] to execute the commands. Press [NO] or the [RIGHT] arrow key to exit the menu. ADD TO PRESET POOL adds the selected preset to the pool of the active project. SEL BANK (ALL) opens the Preset bank selector. The currently selected bank is shown in parenthe sis. Use the [TRIG 8–16] keys, the [ARROW] keys, or LEVEL/DATA to select bank. SORT ABC / SORT 123 toggles between if the presets are sorted in alphabetical order or by slot number. FILTER opens a list where presets can be arranged according to tags. Select and deselect tags by pressing [YES]. You can select multiple tags. Exit the tag list by pressing [NO]. SEARCH will perform a text search and list all presets with names matching or including the text input. For more information, please see “6.5 THE NAMING SCREEN” on page 19 on how to enter text. Press [FUNC] + [NO] to clear search. You can also press [FUNC] and then turn LEVEL/DATA to open the LOAD (PRESET) menu. 9.2.2 SAVE (PRESET) Use this option to save the active tracks preset. 1. Use the [UP]/[DOWN] keys or LEVEL/DATA to select a slot to where you want to save the preset. 2. Press [YES] to save the preset to the selected slot. If the slot already contains a preset you are asked to confirm the save operation. 3. On the NAMING screen, name your preset and then press [YES]. For more information, please see “6.5 THE NAMING SCREEN” on page 19. 4. On the TAG screen you can add tags to the preset. The first two will show on the preset list. Press [YES] to apply or remove tags. Highlight <SAVE> and press [YES] to save. ADD TO PRESET POOL adds the selected preset to the pool of the active project. SELECT BANK opens the Preset bank selector. The currently selected bank is shown in parenthesis. Use the [TRIG 8–16] keys, the [ARROW] keys, or LEVEL/DATA to select bank. SORT ABC / SORT 123 toggles between if the presets are sorted in alphabetical order or by slot number. FILTER opens a list where presets can be arranged according to tags. Select and deselect tags by pressing [YES]. You can select multiple tags. Exit the tag list by pressing [NO]. SEARCH will perform a text search and list all presets with names matching or including the text input. For more information, please see “6.5 THE NAMING SCREEN” on page 19 on how to enter text. Press [FUNC] + [NO] to clear search.
チャンクは隣接セクションとページを共有します。見出し前後のテキストは隣のセクションのものです。