9.5 SAVING A PRESET

9. PATTERNS, KITS AND PRESETS > 9.5 SAVING A PRESET · PDF p. 35 · OS 1.10D
# 9.5 SAVING A PRESET

9. PATTERNS, KITS AND PRESETS
9.4 EDITING A PRESET
Select a track for editing by pressing [TRK] + one of the [TRIG 1–16] keys. When editing the settings of the
track, any changes made will be stored as part of the active pattern.
Adjust the overall volume level of the active audio track with the LEVEL/DATA knob. This setting is saved as
part of the kit.
Edit a preset by adjusting the parameters found on the PARAMETER pages. Access these pages by
pressing a [PARAMETER] page key. Use the DATA ENTRY knobs A-H to change the parameters. For more
information, please see “11. TRACK PARAMETERS” on page 57.
The complete preset, with all its parameter settings may be copied to another track. Press [TRK] + [TRIG
1–16] + [RECORD], and then press [TRK] + [TRIG 1–16] + [STOP] to paste the preset to the selected track.
9.5 SAVING A PRESET
After you edited the parameters of a preset, you can save it to the +Drive.
1.	 Press [PRESET/KIT] to open the PRESET/KIT menu.
2.	 Select PRESET > SAVE, and then press [YES].
3.	 Turn the LEVEL/DATA knob or use the [UP]/[DOWN] keys to select an empty slot to where you want
to save your preset, and then press [YES].
4.	 On the NAMING screen, name your preset and then press [YES]. For more information, please see
“6.5 THE NAMING SCREEN” on page 19.
5.	 On the TAGS screen, use the [ARROW] keys and [YES] key to select the appropriate tags for your
preset, and then select <SAVE> and press [YES].
9.6 THE SETUP MENU
Press [FUNC] + [FLTR] to open the SETUP menu. Here you can set a number of track and kit related pa
rameters. Use the [UP] and [DOWN] arrow keys to move between the options. Press [YES] to confirm your
selection. Press [NO] to exit the menu.
9.6.1 KIT
Here you can select which tracks that should be affected by control all and set up the track routing to
the compressor.
CONTROL ALL CONFIG
Use the [TRIG] keys to select which tracks that you want to be affected by the control all functionality.
MIDI tracks can not be selected. For more information, please see “6.2.2  CONTROL ALL” on page
19.
•	 Control all operations also affects the active track, whether it is selected to be
affected or not.
•	 The control all functionality is not available for the MIDI tracks.
チャンクは隣接セクションとページを共有します。見出し前後のテキストは隣のセクションのものです。