← 検索に戻る

12.6 INTERNAL MIXER PAGE 1

12. FX AND MIXER PARAMETERS > 12.6 INTERNAL MIXER PAGE 1 · PDF p. 69 · OS 1.10D

# 12.6 INTERNAL MIXER PAGE 1

12. FX AND MIXER PARAMETERS
The Digitone II compressor
Filter
(HP/LP)
Gain
Reduction
Input
(LR)
Output
Control
Signal
Dry/Wet
Mix
Make up
Gain
Sidechain
Source
Gain
Computer
Dynamics
(Atk/Rel)
SRC
12.6 INTERNAL MIXER PAGE 1
(MIXER PAGE 2)
The INTERNAL MIXER page 1 is where you can access the TRACK LEVEL parameter of track 1–8 (if they
are audio tracks).
VOL
Pattern Volume sets the patterns overall audio level. At a parameter setting of 100, you have unity gain.
Below that, the signal is attenuated. Above that, the signal is amplified. This parameter can be used to
balance the volume between different patterns and is saved together with the kit. Use LEVEL/DATA to
adjust the settings.
12.7 INTERNAL MIXER PAGE 2
(MIXER PAGE 3)
The INTERNAL MIXER page 2 is where you can access the TRACK LEVEL parameter of track 9–16 (if they
are audio tracks).
VOL
Pattern Volume sets the patterns overall audio level. At a parameter setting of 100, you have unity gain.
Below that, the signal is attenuated. Above that, the signal is amplified. This parameter can be used to
balance the volume between different patterns and is saved together with the kit. Use LEVEL/DATA to
adjust the settings.

チャンクは隣接セクションとページを共有します。見出し前後のテキストは隣のセクションのものです。