12.7 INTERNAL MIXER PAGE 2
12. FX AND MIXER PARAMETERS > 12.7 INTERNAL MIXER PAGE 2 · PDF p. 69–70 · OS 1.10D
# 12.7 INTERNAL MIXER PAGE 2 12. FX AND MIXER PARAMETERS The Digitone II compressor Filter (HP/LP) Gain Reduction Input (LR) Output Control Signal Dry/Wet Mix Make up Gain Sidechain Source Gain Computer Dynamics (Atk/Rel) SRC 12.6 INTERNAL MIXER PAGE 1 (MIXER PAGE 2) The INTERNAL MIXER page 1 is where you can access the TRACK LEVEL parameter of track 1–8 (if they are audio tracks). VOL Pattern Volume sets the patterns overall audio level. At a parameter setting of 100, you have unity gain. Below that, the signal is attenuated. Above that, the signal is amplified. This parameter can be used to balance the volume between different patterns and is saved together with the kit. Use LEVEL/DATA to adjust the settings. 12.7 INTERNAL MIXER PAGE 2 (MIXER PAGE 3) The INTERNAL MIXER page 2 is where you can access the TRACK LEVEL parameter of track 9–16 (if they are audio tracks). VOL Pattern Volume sets the patterns overall audio level. At a parameter setting of 100, you have unity gain. Below that, the signal is attenuated. Above that, the signal is amplified. This parameter can be used to balance the volume between different patterns and is saved together with the kit. Use LEVEL/DATA to adjust the settings. 12. FX AND MIXER PARAMETERS 12.8 FX MIXER (MIXER PAGE 4) On the FX MIXER page you can set the levels of the send effects and master overdrive. VOL Pattern Volume sets the patterns overall audio level. At a parameter setting of 100, you have unity gain. Below that, the signal is attenuated. Above that, the signal is amplified. This parameter can be used to balance the volume between different patterns and is saved together with the kit. Use LEVEL/DATA to adjust the settings. DEL Delay Mix Volume Sets the master volume of the delay. REV Reverb Mix Volume sets the master volume of the reverb. CHR Chorus Mix Volume sets the master volume of the chorus. MOVD Master Overdrive sets overall amount of overdrive for the audio tracks in the kit. Use LEVEL/DATA to adjust the settings. 12.9 EXTERNAL MIXER (MIXER PAGE 5) The EXTERNAL MIXER page contains a number of parameters related to when you use the IN L/R inputs to process incoming audio. IN LR In Level sets the level of the audio from the IN L/R audio input. DUAL Dual Mono sets if the inputs are processed as a single stereo input or as two separate mono inputs. Setting this parameter to ON changes the rest of the parameters from controlling both inputs to sep arate controls for channel L and R split over two mixer pages The BAL parameters changes to a PAN parameter. BAL Balance sets the balance of the audio from the INPUT L and INPUT R inputs in the stereo field.
チャンクは隣接セクションとページを共有します。見出し前後のテキストは隣のセクションのものです。