APPENDIX A: MACHINES
APPENDIX A: MACHINES · PDF p. 89 · OS 1.10D
# APPENDIX A: MACHINES APPENDIX A: MACHINES APPENDIX A: MACHINES A machine is a module within the Digitone II with specific functionality. A machine can be switched out for another machine in the same category. For example different synthesis engines or filters. Every machine has a specific set of parameters tailored to give you the most relevant and useful sound-shaping possibili ties for that particular machine. For more information, please see “5.3.1 AUDIO TRACKS AND MACHINES” on page 16 Use the [UP]/[DOWN] keys to select the parameter group's pages. You can also press a [PARAMETER] key repeatedly to cycle trough the parameter pages in that group. Press and hold a [PARAMETER] key to see the values for all parameters on that page. A.1 ASSIGNING MACHINES TO THE ACTIVE TRACK 1. Press [FUNC] + [SYN] to open the MACHINE menu. 2. Use [LEFT]/[RIGHT] to navigate to the desired machine category. 3. Use [UP]/[DOWN] to select machine, and then press [YES] to assign the selected machine to the track. The rest of this appendix lists the machine-specific parameters on the SYN and FLTR pages. The selected machine determines the parameters available. A.2 SYN MACHINES The SYN machines are different synthesis engines with unique functionalities. In this section you also find the MIDI machine that lets you control external, MIDI equipped, gear. For more information, please see “5.3.2 MIDI TRACKS” on page 17. You can assign any SYN machine to any track. Press [SYN] to access these parameter pages. A.2.1 FM TONE The Digitone II's FM TONE machine is a four operator Frequency Modulation (FM) synth in the style of the classic 80s implementations. However, unlike the early FM synths, the Digitone II use its FM engine more like a complex tone generator than a complete synthesizer voice (although it does have this capa bility too). The Digitone II signal path is more similar to a typical subtractive synth than a classic FM voice. PAGE 1 The parameters on the page 1 control various aspects of the FM engine. You can find more informa tion about the Digitone II FM synthesis in “APPENDIX B: THE FM TONE SYNTHESIS” on page 106. ALGO Algorithm selects the structure of how the four operators are connected to each other. For more information, please see “B.3 ALGORITHMS” on page 107. RATIO C Sets the frequency ratio for operator C. For more information, please see “B.4 FM RATIOS” on page 107.
チャンクは隣接セクションとページを共有します。見出し前後のテキストは隣のセクションのものです。