10.2 TRIG PARAMETERS PAGE 1
10. AUDIO TRACK PARAMETERS > 10.2 TRIG PARAMETERS PAGE 1 · PDF p. 50–51 · OS 1.40A
# 10.2 TRIG PARAMETERS PAGE 1 10. AUDIO TRACK PARAMETERS 10. AUDIO TRACK PARAMETERS Here follows a description of all of the parameters that are available on the audio tracks PARAMETER pages. The parameters on the TRIG page are not saved together with the sound, but are instead saved with the pattern. The audio track parameters may be locked to other settings on any step of the pattern by first pressing and holding a [TRIG] key, then changing the parameters’ settings with the DATA ENTRY knobs. For more information, please see “9.10.1 PARAMETER LOCKS” on page 43. 10.1 EDITING THE AUDIO TRACK PARAMETERS There are five PARAMETER pages for the audio tracks. Press the [PARAMETER] keys to access the audio tracks PARAMETER pages. The FLTR, AMP and LFO parameter groups has two pages To access page one, press the [PARAMETER] key once. To access page two, press the [PARAMETER] key twice. Use the DATA ENTRY knobs A-H to change the parameters. Press and hold a [PARAMETER] key to see the values for all parameters on that page. • You can always reload a sound from its last saved state. Press [TRK] + [TRIG1–12] + [NO] to reload the sound. • You can also randomize the parameter settings on a specific PARAMETER page on an audio track. Press [PARAMETER] key + [YES] to randomize all parameters on that page. Every time you press this key combination, the parameters randomize in a new way. The TRIG [PARAMETER] page can not be randomized. • Press [PARAMETER] key + [NO] to reset the PARAMETER page to its last saved state. 10.2 TRIG PARAMETERS PAGE 1 Set the actions for when a note is trigged. Change settings using the DATA ENTRY knobs. These general settings affect note trigs placed in the sequencer. Press [TRIG PARAMETERS] to access this parameter page. 10.2.1 NOTE Trig Note sets the pitch of the note when trigged. When in LIVE RECORDING mode and playing in KEY BOARD mode, the pitch of the [TRIG] keys played will override this setting. 10.2.2 VEL Trig Velocity sets the velocity of the sequencer’s note trigs. 10.2.3 LEN Trig Length sets the length of the note trig. In LIVE RECORDING mode, the duration of pressing the [TRIG] keys overrides this general setting. LEN can be set to infinite length 10.2.4 PROB Trig Probability sets the probability that the trigs on the track plays or not. The probability outcome is re-evaluated every time a trig is set to play. The default setting is 100%, meaning that all the trigs on the track plays every time. (0%–100%) This parameter changes temporarily to display and control COND (Trig Condition) when you add a condi tional lock. COND sets the Trig Condition with which a set of conditional rules can be applied to any trig, using a parameter lock. For more information, please see “9.10.3 TRIG CONDITIONS AND CONDITION AL LOCKS” on page 44. If you have placed a conditional lock on a trig in the sequencer, the trig condition overrides the Trig Probability setting. For example, if you set PROB to 70% and a FILL trig condition on a trig, that trig will only (and always) play when the Syntakt is in FILL mode. For more informa tion, please see “9.10.3 TRIG CONDITIONS AND CONDITIONAL LOCKS” on page 44. 10. AUDIO TRACK PARAMETERS 10.2.5 FLT.T Filter Trig controls if the filter envelope will be trigged or not. 10.2.6 LFO.T LFO Trig controls if the LFO will be trigged or not. 10.2.7 PTIM Portamento Time sets the time for the portamento. 10.2.8 PORT Portamento turns the portamento on/off. For more information, please see “8.6.1 SETUP” on page 30. 10.3 TRIG PARAMETERS PAGE 2 The second TRIG PARAMETERS page contains the parameters and settings for the Euclidean sequencer. For more information, please see “9.4 EUCLIDEAN SEQUENCER MENU” on page 39 10.4 SYN PAGE The parameters on this page control the (analog and digital) sound synthesis of the selected machine, and these parameters vary depending on what machine is selected. The parameters for the BD Classic machine are shown here. For detailed descriptions of the SYN page parameters for the machines, please see “AP PENDIX A: MACHINES” on page 91. Use the DATA ENTRY knobs to change the settings. Press [SYN] to access this parameter page. 10.5 FLTR PAGE 1 On FILTER page 1, you will find all parameters that control the multimode filter and its associated envelope. Press [FLTR] to access this parameter page. 10.5.1 ATK Attack Time sets the length of the attack phase of the filter envelope. 10.5.2 DEC Decay Time sets the length of the decay phase of the filter envelope. 10.5.3 SUS Sustain Level sets the sustain level of the filter envelope. 10.5.4 REL Release Time sets the length of the release phase of the filter envelope. The release time can be set to infinite.
チャンクは隣接セクションとページを共有します。見出し前後のテキストは隣のセクションのものです。