10.6 FLTR PAGE 2

On FILTER page 2, you will find the parameters that control the envelope delay parameter and the base-width filter (for DIGITAL voices). Press [FLTR] twice to access this parameter page.

10.6.1 DEL

Envelope delay sets the time before the attack phase of the filter envelope starts. This parameter is part of the filter envelope that controls the multimode filter. You can also press and hold [FUNC] and then turn DATA ENTRY knob A to quickly access this parameter from FILTER PAGE 1.

10.6.2 FENR

Filter envelope reset sets the filter envelope behavior:

ON resets the envelope for each consecutive trig (default).

OFF does not reset the envelope for each consecutive trig.

10.6.3 BASE

Sets the base frequency of the filter. This parameter is only available if you have selected a track with a Digital voice type (Track 1–8).

10.6.4 WIDTH

Sets the frequency width above the base frequency. This parameter is only available if you have selected a track with a Digital voice type (Track 1–8).

The base-width filter is basically a Highpass filter and a Lowpass filter connected in series. The filters BASE and WIDTH parameters define the base-width filters frequency range.

Examples of how the BASE and WIDTH parameters affect the filter frequency range:

FREQUENCY

AMPLITUDE

Base Width FREQUENCY

AMPLITUDE

Base Width FREQUENCY

AMPLITUDE

Base Width

• The base-width filter is only available for tracks with Digital voices types (Track 1–8).
• With BASE set to 0, the filter functions as a low pass filter with WIDTH adjusting the frequency range.
• With WIDTH set to 127, the filter functions as a high pass filter with BASE adjusting the frequency range.
• With BASE set to 0 and WIDTH set to 127 the filter does not affect the sound.