13.4 MIXER PAGE 1

13. DELAY, REVERB AND MIXER PARAMETERS > 13.4 MIXER PAGE 1 · PDF p. 70 · OS 1.40A

# 13.4 MIXER PAGE 1

13. DELAY, REVERB AND MIXER PARAMETERS
13.3.5 HPF
HPF sets the cutoff frequency of the reverb high-pass filter that affects the audio going in to the reverb.
13.3.6 LPF
LPF sets the cutoff frequency of the reverb low-pass filter that affects the audio going in to the reverb.
13.3.7 VOL
Mix Volume sets the volume of the Reverb output signal.
The parameters on the REVERB parameter page can be controlled by the sequencer using
the FX Track. For more information, please see “6.3.3 THE FX TRACK” on page 21. and
“12. FX TRACK PARAMETERS” on page 62.
13.4 MIXER PAGE 1
The INTERNAL MIXER 1 page is where you can access the TRACK LEVEL parameters of the track 1–8
audio tracks.
Press [FUNC] + [LFO] to access this parameter page.
13.4.1 TRK 1–8
Sets the TRACK LEVEL of track 1–8. A striped level bar indicates that the track is routed to the FX track.
A MIDI jack symbol indicates that the track is using a MID machine.
13.5 MIXER PAGE 2
The INTERNAL MIXER 2 page is where you can access the TRACK LEVEL parameters of the track 9–12
audio tracks and the overall levels of the signals from the delay, reverb, and the incoming audio from exter
nal sources via the INPUT L/R inputs.
Press [FUNC] + [LFO] twice to access this parameter page.
13.5.1 TRK 9–12
Sets the TRACK LEVEL of track 9–12. A striped level bar indicates that the track is routed to the FX
track. A MIDI jack symbol indicates that the track is using a MID machine.
13.5.2 FX
Sets the overall level of the FX track.
13.5.3 DEL
Sets the overall level of the delay.
13.5.4 REV
Sets the overall level of the reverb

チャンクは隣接セクションとページを共有します。見出し前後のテキストは隣のセクションのものです。