3.2 REAR CONNECTORS
3. PANEL LAYOUT AND CONNECTORS > 3.2 REAR CONNECTORS · PDF 第 14 · OS 1.40A
# 3.2 REAR CONNECTORS 3. PANEL LAYOUT AND CONNECTORS 3.2 REAR CONNECTORS 1. POWER, Switch for turning the unit on and off. 2. DC In, Input for power supply. Use the included PSU-3c power adapter connected to a power outlet. 3. USB, For connecting the unit to a computer. For MIDI control or Overbridge use. Use the included A to B USB 2.0 cable to connect to a computer host. 4. MIDI THRU/SYNC B, Forwards data from MIDI IN. It can also be configured to send DIN sync to legacy instruments. Use a standard MIDI cable to connect another MIDI device in the chain. 5. MIDI OUT/SYNC A, MIDI data output. It can also be configured to send DIN sync to legacy instruments. Use a standard MIDI cable to connect to MIDI In of an external MIDI device. 6. MIDI IN, MIDI data input. Use a standard MIDI cable to connect to MIDI Out of an external MIDI device. 7. INPUT L/R, Audio inputs used for external sources for audio processing. Use a 1/4” mono phone plug (unbalanced connection). 8. OUTPUT L/R, Main audio outputs. Use either 1/4” mono phone plug (unbalanced connection) or 1/4” TRS (Tip/Ring/Sleeve) phone plug (balanced connection). 9. HEADPHONES, Audio output for stereo headphones. Use 1/4” TRS (Tip/Ring/Sleeve) phone plug. 3.3 SETTING UP AND STARTING THE SYNTAKT Make sure you place the Syntakt on a stable support, such as a sturdy table, with sufficient space for the cables. Make sure to switch off all devices before you connect the Syntakt to other devices. 1. Plug the supplied power adapter to a power outlet and connect the small plug to the 12 VDC In input on the Syntakt. 2. Connect OUTPUT L/R from the Syntakt to your mixer or amplifier. 3. If you want to control the Syntakt from a computer, connect a USB cable between the computer and the USB connector of the Syntakt. 4. If you want to use MIDI to control the Syntakt, connect the MIDI OUT port of the device you wish to send data from to the MIDI IN port of the Syntakt. The MIDI THRU port duplicates the data arriving at the MIDI IN port, so it can be used for chaining MIDI units together. If you want to use Syntakt to control other devices using MIDI, connect the MIDI OUT port of the Syntakt to the MIDI IN port of the of device you want to control. 5. If you want to mix in audio to the Syntakt from external sources, connect the audio source to INPUT L/R. 6. Switch on all units. Switch on the Syntakt by toggling the Power switch located at the back of the unit.
章节与相邻小节共享 PDF 页面；标题之前/之后的文本属于相邻小节。